Search results

Message me please. Thanks!

Does anyone know if the Voyager 248 has a mesh or any other filter in the freshwater system? Thanks!

Wondering if there's a list available per model showing what changed year to year (major).

What's the best material for toe rails? Starboard, OEM, or something else? Thanks

Grady Voyager 248, dual HPDI 150s. head unit is a Lowrance LCX 38c HD. Original Lowrance transom mount transducer is shot. Would like to install a thru-hull transducer / airmar b60 (20 deg) but here are my concerns: No clean / designed location on the hull for thru hull ducers. Grady...

Currently on Yam 13 3/4 x 17 M1 / ML1 props. Above is Gradys recommended prop for my hull / motor setup. Excellent all around performance, cruise at 2 mpg / 37 mph, wot at 50 mph / 5500 rpm. Im told I will spin the hubs sooner or later, and that Merc props are better all around. Any specific...

Moving my GPS down to what I call the "glove compartment". Tight fit, but it should work. To pull out the old cables, I took off the rigging box made of 2 wood panels imediately to the right of the step on the helm (where the hull load rating / max passenger / HP plate is located). The...

Re-doing the dash soon, moving all my instruments inside the "glove" compartment. Tight fit, but it will work. But first, the dash material is awful. Seems like a vinyl of some type. Can't get it clean, tried the usual (even BKF, I believe). Does anyone know what can be used to clean...

Removing the old name and moving the reg numbers, the original color of the boat is obvious. The gelcoat needs work, no doubt, but I don't think it's that bad. Wondering if starting with rubbing compound has worked for you, or if wet sanding was needed. Thanks.

Today I replaced the cabin spotlight with a small fan. Install went great. The problem came when I turned OFF both of the main switches (2 batteries, 2 switches), and noticed the fan keeps running, much slower, but it's still running. Any ideas why that would happen? Doesn't seem right...

Hello all, My boat had bottom keel damage when purchased. Area in question is hard (no soft spots), and does not drip when I take it out of the water (no intrusion that I can tell). Should I: Fix the fiberglass / gelcoat on that area before bottom paint VS Just the bottom paint Not...

Hello all, The glass separates from the alum frame when I open the hatch. I noticed the riser arm pushes up by the glass, not by the frame, and I guess over time this happens. Obviously, when it rains I get a couple of drops in the cabin. What adhesive / sealant / glue should I use to glue...

Hi all, First, a quick into. After many months of reading and research, I pulled the trigger yesterday and bought a 1996 Voyager 248 (first boat). The kids are already asking when we can put her in the water, but of course, I already have a list of things that need to be taken care of before...