1988 Seafarer 2005 Mercury Optimax Project

Norcoastal

Well-Known Member
Joined
Apr 13, 2021
Messages
192
Reaction score
49
Points
28
Age
65
I’ve gone through the entire boat and it just needs to be finished. The list of things that need to be completed is short. The biggest thing is a new bulkhead to the cabin as is common among these boats (I have the original and the cabin door).

The transom is solid and the fuel tanks were replaced about 10 years ago.

The list of improvements is long. Custom dash with new electronics and custom switch panel by New Wire Marine and I have a full canvas enclosure.

icom VHF, Fusion stereo, Sony speakers, Garmin plotter. New helm, Edson wheel, new hydraulic lines and new control cables.

It needs a good compounding and polishing and it will polish up nicely.

It has a trailer. The boat needs finishing. It is NOT turn key. It needs batteries and to check all systems, but it doesn’t need much.

I have more parts like all new GW trim, rear cushion bolsters, seats, GW decals and more.

$8,900 but I’m open to offers.
 
Last edited:

Norcoastal

Well-Known Member
Joined
Apr 13, 2021
Messages
192
Reaction score
49
Points
28
Age
65
Here is a before and after of the dash.
 

Attachments

  • 343B7A65-433C-48CD-A3D3-2ACCB5D9D815.jpeg
    343B7A65-433C-48CD-A3D3-2ACCB5D9D815.jpeg
    443.3 KB · Views: 32
  • 9898ABEC-EF0B-4B74-B7F3-63464573BCD6.jpeg
    9898ABEC-EF0B-4B74-B7F3-63464573BCD6.jpeg
    452.7 KB · Views: 32

Norcoastal

Well-Known Member
Joined
Apr 13, 2021
Messages
192
Reaction score
49
Points
28
Age
65
I can’t believe I’m moving again, but I’m moving again and I can’t take my boat with me.

Don’t be afraid to make a low ball offer. It’s a great boat with most of the hard work done.

All I could say is no, and you may be surprised!