2001 GW 265 Fuel tank fabricator for repower mission

Sketchywind

GreatGrady Captain
Joined
Nov 18, 2013
Messages
57
Reaction score
16
Points
8
Location
San Francisco
Model
Express 265
Continuing my 2001 GW 265 repower mission.

If my boat surveyor gives the green light with no major structure damage, I’m going to finance a Merc repower from my 2001 HPDIs with 1750 hours and a blown port motor.

I pulled the decks yesterday and the tops and sides look pretty decent after a salt-away cleaning. I rinsed off the tanks 1-2 times a year, so not much crud on top. Used a borescope to verify no major “corrosion volcanos"

Going to have yard pull aft tank to inspect bottom after survey.

If tanks need replacement, what aluminum tank fabricator do you recommend? How much is estimated cost of new tanks?

I got transom rebuild estimate at $15K and Mercury V6 225HP with DTS estimated $60-65K here in San Francisco Bay Area.

I decided three plans for my 2001 GW265:
1.Repower, if surveyor gives a green light on no major structural issues other than transom rebuild. If fuel tanks are solid, go forward with repower. Estimated cost: $75K
2.Repower and replace fuel tanks. Estimated cost: $75K, plus new fuel tanks installed ($10k?) = $85K
3.Surveyor says boat has major structural issues and not worth repower: Bolt on used HPDI 200 and buy a newer used boat. Or sell it as project boat with blown port motor.

Here are before and after tanks after a little cleaning.
 

Attachments

  • IMG_3869.jpeg
    IMG_3869.jpeg
    2.2 MB · Views: 4
  • IMG_3907.jpeg
    IMG_3907.jpeg
    2.2 MB · Views: 4
  • IMG_3903.jpeg
    IMG_3903.jpeg
    2.3 MB · Views: 4
Last edited:
I know some good NJ tank shops but...You need to find a local tank fabricator because shipping tanks is crazy expensive.
As I said, you could get away with just the 130 gal main (fwd) tank. that'll give you at least a 180 mile range at 30mph.
If you want more, you could fit an aft prefab plastic 50 gal tank and have room for storage.
 
  • Like
Reactions: Sketchywind
Good idea. I don’t see myself running over that 180 range, but I got my hands on some tuna gear so possibly in the future.
Since I primarily used the forward tank, I was thinking if I replace both tanks to dedicate the aft tank as non-ethanol fuel only to protect it from the ethanol effects not using it frequently. Theres a racetrack nearby that sells non-ethanol 91 race fuel I can use portable fuel jugs to keep 25-30 gallons as back up fuel. Protect the tank from phase separation and corrosion.
Replacing tanks leaking or not may be a good move if investing in 65k motors.