My 2003 Seafarer is new to me and I can’t find a manual switch to activate the bilge on the control panel. Can someone offer experience and direction? Thx
226 Manual Bilge switch.
- Thread starter bobvany
- Start date
These are "usually" pretty obvious. Can you post a pic of the switches on the panel? I would imagine there would be info in your manual? You can download it from Grady's site.
- Joined
- Mar 1, 2006
- Messages
- 3,069
- Reaction score
- 1,378
- Points
- 113
- Location
- Berea, KY/Cross, SC
- Model
- Seafarer
My 2004 you push top of switch and it comes on. Turn it off and it's automatic. 5th switch from the left.
Fishtales
Well-Known Member
- Joined
- Jan 31, 2005
- Messages
- 8,234
- Reaction score
- 1,344
- Points
- 113
I'm assuming you mean the bilge pump? You sould have a switch on the panel that says Fwd Bilge, also and Aft Bilge. There also would be a float so it goes on manually if needed.
Maybe it is just hardwired (float only, no switch)? Not usually the way GW wires them.
Maybe it is just hardwired (float only, no switch)? Not usually the way GW wires them.