Enclosure Snaps

[awc4kds]

A few of the enclosure snaps on my '06 Marlin have pulled out of the fiberglass/gelcoat on the side of the helm area aft of the tempered glass. What is the best way of re-securing the snaps back into the fiberglass? Is there a good product that can be used to cement the snap screws back into place?

Thanks guys!

 

[georgemjr]

Fill the hole with 2 part epoxy resin from West Marine, which you fill through a syringe, also available there. Once it hardens, you can re-drill and reinstall the screw snap...