I've got a 1994 Yamaha 150 TXRT on my Grady White 208 Adventure. Neither the boat nor the engine has been out much this year. It has about 550 hours on it.
I was able to get it started about two months ago, but it wouldn't run for long and I ran the batteries down trying to get it started. (Fortunately, I was still at tthe dock.)
Anyway, a friend I went to the marina today with recharged batteries and attempted to start it, but we were unsuccessful. (I brought him along because he's got much more experience with outboards than I do.)
We had an induction timing light and checked for power to the cylinders. The port plug wires were getting power, but the starboard plug wires did not get power. We were unable to see anything obviously wrong with the wiring and connections.
Any ideas or suggestions to help me :?:
I was able to get it started about two months ago, but it wouldn't run for long and I ran the batteries down trying to get it started. (Fortunately, I was still at tthe dock.)
Anyway, a friend I went to the marina today with recharged batteries and attempted to start it, but we were unsuccessful. (I brought him along because he's got much more experience with outboards than I do.)
We had an induction timing light and checked for power to the cylinders. The port plug wires were getting power, but the starboard plug wires did not get power. We were unable to see anything obviously wrong with the wiring and connections.
Any ideas or suggestions to help me :?: