Flag pole placement on a GW376 ?

[Ronrog]

I just put a new 376 Canyon in the water and realized it did not come with a US Flag or flag holder. If anyone has any ideas or suggestions as to where to put it or not put it, your comments are welcomed. I will not be doing a lot of fishing with this boat, so that might help with your thought process.

Thanks

Ron

 

[Fishtales]

Hi,
I have a weighted pole that drops into a standard rod holder. I use a 12X18 flag and wrap a small bungee cord; clip it to the flagpole shaft and then around the rod holder and clip it to the shaft again to hold it in place when running. See link below.

http://www.thehulltruth.com/boating-for ... guy.html#b

Couple of things:
- This is a nice set up as you don't have to drill anything and you can quickly take down if desired.
- Flags make a bit of noise running, so it is nice to be able to get it out of the way easily.

Here is the site.
http://shop.coolwaterproducts.com/Rod-H ... r_c103.htm

 

[Fishtales]

forgot, there is a picture of this in the gallery.

gallery/image.php?album_id=18&image_id=680&view=no_count