GPS receiver on soft top.

Peter Pakula

New Member
Joined
Jan 18, 2010
Messages
2
Reaction score
0
Points
0
Hi guys,

I have a 257 Advance with a Soft Top. I need to change the GPS which is in the middle of the soft top.

Are there any tricks to doing that without ripping the soft top?

Thanks in Advance (257) :)
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,148
Reaction score
1,312
Points
113
Location
NYC
Are you talking about the antenna? I am not sure what you are asking.
 

Peter Pakula

New Member
Joined
Jan 18, 2010
Messages
2
Reaction score
0
Points
0
Yes, thanks the antenna. Different countries different terminology :)
 

Gman25

GreatGrady Captain
Joined
Feb 25, 2005
Messages
809
Reaction score
4
Points
18
Location
Bayshore, NY
Try to post a picture. Im not sure how it would be mounted on a soft top
 

GYP-SEA

Active Member
Joined
Aug 25, 2009
Messages
31
Reaction score
0
Points
0
Location
Greensboro-Wilmington NC
I have an Advance 247 with a soft t-top. the frame that holds the canvass on has a block of vinyl that is screwed into the alum frame the gps antenna base is mounted onto the block and the antenna is then mounted to the antenna base.
 

seasick

Well-Known Member
Joined
Aug 19, 2008
Messages
9,148
Reaction score
1,312
Points
113
Location
NYC
Many of the Garmin antennas are either directly bolted to the top using three screws or are bolted to a mounted adapter that then threads onto a mounting pole. It should be easy to find the screws if no pole is used. The cable to the antenna is permanently connected to the antenna and therefore has to be rerun . That can be tricky if the wire routes through tubing