How thick can the fairing compound be?

[1st grady]

I am prepairing to refinish the trash can lid and was wondering about the maximum thickness the System Three fairing can be applied. I have some areas that are about 3/32 deep that need to be filled. Use System Three or an epoxy resin? Thanks
Have a great Christmas!

 

[BobP]

Since no response here yet, you will get one at Classicmako.com - for sure.

 

[bigk23surf]

If you do get a response there post it here, Im about to redo the lids to my fish boxes and was just going to sand, use some compound and re gel coat it.

 

[gw204]

Fairing compound is merely meant to smooth the surface, fill pin holes, etc. It is not meant to build thickness. I would lay a bit of 3/4 oz. mat w/ epoxy to get the area as flat as possible and then fair and gelcoat.