Thanks for looking at this post. I just purchased a 272 1998 GW Sailfish and am in the process of mounting the outrigger holders, standard Lee Juniors bought from a GW member of this website, thanks. I would need three measurements from the attachment points on the side of the cockpit. The first one would be the deck up to the outer edge of the bottom attachment foot (center attachment point, lowest to deck). The second and third measurements would be off of the rear attachment foot. I would need the measurement from the deck to the outer edge of the rear attachment foot and the measurement from the rear, end, of the cockpit to place the outrigger holder correctly. If you have a 272 or even a 282, the measurements should be the same. Thanks for the help and time if you can do the measurement. Steve gaylors at gmail dot com