Thru Hull Seacock

[Joe Desiderio]

Hi all, Their is a thru Hull seacock which feeds the salt water pump for the wash down hose and live well. Anyone one know where it is located in case I need to close it because of a leak? Thanks, Joe D

 

[Finest Kind]

I guess it varies according to year and model, but on my 1988 Trophy Pro it is located under the step in the cabin.

 

[ElMar]

What model?

My 268 Islander is under the sten seat Port side of centerline.

 

[Uncle Joe]

In my 1985 Offshore it was located in the stern right under the access cover.

 

[Joe Desiderio]

Hi, I traced the intake line for the saltwater pump for the wash down/live well. It went under the deck along the centerline to a place I could not reach. Maybe it loops back to a place I could reach and I just missed it. I will check again. Just trying to get familiar with new boat. Thanks for your help. Joe D

 

[Doc Stressor]

Look at the bottom of your hull. You'll see the strainers and that's where the seacocks will be located.

 

[Joe Desiderio]

Look at the bottom of your hull. You'll see the strainers and that's where the seacocks will be located.

 

[Joe Desiderio]

Thanks for your help.

 

[Fishtales]

Do you have an owners manual? There should be a drawing showing where it is.

 

[DennisG01]

The seacock should always be immediately inside the hull - on the opposite side of the thru-hull fitting. There should be NO lines used before the seacock. Look where the water enters the hull, that is where you would find the seacock.