Latest activity
-
Normal for a saltwater boat. The pump motor, being an electric motor, is ferrous and not stainless. Its just the outside. Wire brush... -
Soon to be mounting new 300’s on my 282 and the original motor height from Grady was up one bolt hole from all the way down. Leaving one... -
Ffamily affair replied to the thread 282 motor height.I don't have experience on the 282 but have experienced 1st hand that GW tends to bury props to make for a more 'robust' set-up at the...
-
Bbillyttpd replied to the thread Is there a place to get actual dimensions on various models?.The printed brochure that you can archive on the Grady website. They usually list cockpit square footage and cockpit depth in...
-
Soon to be mounting new 300’s on my 282 and the original motor height from Grady was up one bolt hole from all the way down. Leaving one... -
FREEDOM!!! replied to the thread 235 vs 255.My ultimate "upgrade" boat is an Auqila 32. But not ready to drop half a mil on a boat yet. -
Go onto the Grady White website, where if you scroll partway down and click on "Performance" you'll get the weight as tested of two...
-
Fishtales replied to the thread VIN numbers.I'd be serializing it myself and file the paperwork. -
Fishtales replied to the thread Aft Seat Brackets for 283 Release.Can try GW Cust Service. Wise made the older seats but do not have the patterns anymore. I contacted them 10 years ago and they had a...
-
Fishtales replied to the thread Cutting front of bow rail out.I'm not a fan due to the structural integrity concern, but if you do could you make an adapter with smaller dia tubing to put it back in...
-
GAnyone ever cut the front of the bow rail out to make it easier to get one and off using the pulpit? Thinking about doing it on my 272...
-
Mustang65fbk replied to the thread 235 vs 255.Go onto the Grady White website, where if you scroll partway down and click on "Performance" you'll get the weight as tested of two... -
Offer accepted, now for the survey and sea trial. Any idea of total weight on the trailer? I have plenty of capacity with my...
