Latest activity
-
So what you probably have there, at approaching 4 decades old.. is "not-so-non-skid" non-skid? :) When I re-did my '82 - which was... -
Sardinia306Canyon replied to the thread USB C.The above NewWireMarine ones look good, i like the spring loaded cap. Ex owner installed similar ones but with a rubber plug cap what...
-
The engine will drain just fine. This is in regards to the lower unit - specifically, the cavity in front of the prop. Some water will... -
OI have a 307 Freedom, and and the 3rd owner. I believe the windlass (Lewmar) foot switches are original. They are a black sort of...
-
-
DDennisG01 replied to the thread New Boat Questions - The basics.What do you mean by "linking up"? Aren't they surge brakes? It would be EXTREMELY rare to see EOH brakes on this size trailer. How's...
-
FreedomCrawler replied to the thread New Boat Questions - The basics.Plugs, cap and rotor I was hoping to wait until I pulled it back out from storing for the winter. So for reference all I wanted to do... -
-
HOA's.... yuck. West Marine? Wrong Marine.... :p Get the impeller "kit". You won't know if you need the housing/wear plates till you...
-
DDennisG01 replied to the thread Deck refinish.So what you probably have there, at approaching 4 decades old.. is "not-so-non-skid" non-skid? :) When I re-did my '82 - which was...
-
DDennisG01 replied to the thread New Boat Questions - The basics.HOA's.... yuck. West Marine? Wrong Marine.... :p Get the impeller "kit". You won't know if you need the housing/wear plates till you...
-
Hookup1 replied to the thread Deck refinish.I have a 1997 Islander. All walkwaround surfaces are diamond non-skid. It's actually in good shape with a few tiny spots. Your boat... -
RRickforth replied to the thread Deck refinish.It is a flat non skid
-
Hookup1 replied to the thread Deck refinish.Hard to tell from the photo but is that a diamond non-skid or a flat non-skid? If diamond non-skid I have not found a way to paint it...
-
FreedomCrawler replied to the thread New Boat Questions - The basics.I ended up calling it for the day. I can’t keep the boat at my place for more than a day or two hooked up to my truck thanks to the HOA...
-
Ok, since the fill cap was off, that eliminates any venting issues as being the problem. This is assuming the gas tank is full, for...
-
RMy 1990 204C floor needs to be updated. It is the original gel coat in fair condition. I would like to improve durability and look. I...
-
