Latest activity
-
Late Again Grady replied to the thread What have you done to your Grady lately?.Just put mine in the shop for a complete re-wire. Way too many things direct wired to batteries and things that should be on a switch... -
Sseasick replied to the thread Water in Sailfish.I would be surprised if that is where the water is getting in. Assuming the chop is not washing over the deck, I would look at the deck...
-
Sseasick replied to the thread Seakeeper Ride on Grady 235.:)
-
Sseasick replied to the thread Adventure 208 steering.The rigging tubes are on the starboard side. There are two of them. The exact location changed in the 2001 model year or perhaps...
-
Mustang65fbk replied to the thread Water in Sailfish.A couple of thoughts on the matter here.... first would be do you pull the boat out of the water every time you're done for the day or... -
Kkarnacker replied to the thread 248 Voyager Tank Replacement.Hi Ford - I Really appreciate the additional info/response. I left a msg with GW parts. (They sometimes are "slow" to respond to...
-
DDennisG01 replied to the thread Adventure 208 steering.Rigging tubes will be there - not always "easily" seen - you just need to look better. Follow some of the things from the bilge that go...
-
SSapelo20 replied to the thread Adventure 208 steering.Reviving an old thread: I have a 2000 Adventure 208. The previous owner installed a Yamaha 250 and kept the original cable steering...
-
Ffamily affair replied to the thread Water in Sailfish.I've been chasing this on my boat. It only happens when it's choppy. I suspect it is water coming back in through the rear bilge line...
-
DDennisG01 replied to the thread Water in Sailfish.Search on here (and the net) for more info, but most likely the reason you are seeing this is because (as is typical with Grady's), the...
-
RHave a 1997 27' Sailfish always have water in the hull when I get back from a day's fishing when I pull the plug. I do not see the...
-
HHalfhitch replied to the thread Seakeeper Ride on Grady 235.As for alternate options and I wanted to stand on something that didn't list, I would go stand on a sidewalk.
-
Sseasick replied to the thread Seakeeper Ride on Grady 235.That is in the ballpark for installation. It can be a bit lower depending on specific cases. One big expense is the glass work to...
-
Seafarer_Bob replied to the thread 90" Garmin Kraken on 228.The guy that cut the plate for me talked me out of using 1/2” aluminum in favor of 3/8” and I’m glad he did. The only flex is in the... -
-
MMA208 replied to the thread Seakeeper Ride on Grady 235.Just a reference point but I asked at the New England Boat show and the smallest ride tabs were $4500 in parts and they quoted me...
