Latest activity

  • J
    I'm looking to get a larger boat. Have a Seafarer 226 and looking to swap that out (this or next season) for a larger/wider GW...
  • Denko
    Denko replied to the thread Water in Sailfish.
    I noticed more bilge water than usual when using the livewell on my GS, when sloshing around it would go up the sides and spill over the...
  • Hookup1
    Hookup1 replied to the thread Water in Sailfish.
    The water that gets into the boat will be under the fuel tanks at the dock. When you put the boat up on plane trim the nose up and the...
  • S
    seasick replied to the thread Water in Sailfish.
    Thinking this over again, I have a few questions. You say that water drains after you boat in chop. What are the details of when that...
  • D
    drbatts replied to the thread Water in Sailfish.
    Check all your deck plates and or reseal if you haven't done it already. These often leak and are usually not sealed very well at the...
  • Legend
    Legend replied to the thread Replacing the DC 440.
    The newer Isotherm Refrigerators are now AC/DC - they automatically switch when the boat is connected or disconnected from shore power.
  • Late Again Grady
    Just put mine in the shop for a complete re-wire. Way too many things direct wired to batteries and things that should be on a switch...
  • S
    seasick replied to the thread Water in Sailfish.
    I would be surprised if that is where the water is getting in. Assuming the chop is not washing over the deck, I would look at the deck...
  • S
    seasick replied to the thread Seakeeper Ride on Grady 235.
    :)
  • S
    seasick replied to the thread Adventure 208 steering.
    The rigging tubes are on the starboard side. There are two of them. The exact location changed in the 2001 model year or perhaps...
  • Mustang65fbk
    Mustang65fbk replied to the thread Water in Sailfish.
    A couple of thoughts on the matter here.... first would be do you pull the boat out of the water every time you're done for the day or...
  • K
    karnacker replied to the thread 248 Voyager Tank Replacement.
    Hi Ford - I Really appreciate the additional info/response. I left a msg with GW parts. (They sometimes are "slow" to respond to...
  • D
    DennisG01 replied to the thread Adventure 208 steering.
    Rigging tubes will be there - not always "easily" seen - you just need to look better. Follow some of the things from the bilge that go...
  • S
    Sapelo20 replied to the thread Adventure 208 steering.
    Reviving an old thread: I have a 2000 Adventure 208. The previous owner installed a Yamaha 250 and kept the original cable steering...
  • F
    family affair replied to the thread Water in Sailfish.
    I've been chasing this on my boat. It only happens when it's choppy. I suspect it is water coming back in through the rear bilge line...