Latest activity
-
DDA1977 replied to the thread Scupper hoses.Based on recent survey, no signs of delamination or transom flex. But I agree that the transom needs some attention very soon. Planning...
-
Sseasick replied to the thread Canyon Key Fob.I am guessing: Look at the side seams for a groove that a coin like a quarter would fit. Insert the coin and twist. You may need to...
-
Sseasick replied to the thread New Grady-White Freedom 265.I think I rad that the max HP for the new model is 400.
-
Dafter replacing the drain hoses and deck drains in my boat, i can tell you that it would have been easier to wrap with tape. at least...
-
Ekea replied to the thread Scupper hoses.after replacing the drain hoses and deck drains in my boat, i can tell you that it would have been easier to wrap with tape. at least... -
Mmleads310 reacted to DennisG01's post in the thread Can’t reach lower transom mounting bolt!! with
Haha.
We call them "Bilge Monkeys" :) -
SeanC replied to the thread Scupper hoses.If your thru-hull fittings are plastic and original, you greatest risk isn't your hoses suddenly failing but your thru-hull fitting... -
DYou could plug the bad one from the outside until you can fix it. Wood bung or a nerf plug... Those hoses with the wire in them are...
-
GI just saw that Grady-White is planning to introduce a Freedom 265. Looks like it's going to be powered by twins (200s or 250s?) but...
-
SkunkBoat replied to the thread Scupper hoses.You could plug the bad one from the outside until you can fix it. Wood bung or a nerf plug... Those hoses with the wire in them are... -
-
DDennisG01 replied to the thread Scupper hoses.Have you checked the integirty of the transom and whether or not there is risk of the engines breaking off the transom? With the...
-
THello…I have a 2018 Canyon 271. My key fob is acting erratically. Do I have to change a battery in it and if so how on earth do you...
-
-
DDA1977 replied to the thread Scupper hoses.The scuppers are above the waterline. However, the waterline is exactly at the bottom of the scupper thru hull hole. My transom is also...
-
DDennisG01 replied to the thread Scupper hoses.True, but... if you had a 2-1/2" hole thru your transom, yet it was 2" above the waterline, would you put the boat in the water?
-
Sseasick replied to the thread Scupper hoses.Key question is whether the scuppers are under the water or above the water line.
