Latest activity
-
HHalfhitch replied to the thread Fuel level measurement.The best way to go for accuracy/dependability is to purchase sending units from KUS. They, along with your new gauges will relieve the...
-
kirk a replied to the thread Generator removal.Punted and had the boatyard remove the generator. Now there is a huge void in the bilge. Curious as to what others may have done in... -
HHello everyone! I have a 1994 Adventure and I'm wondering if there is a good way to physically check the amount of fuel in the tank...
-
DDA1977 replied to the thread Scupper hoses.Fittings are chrome over brass. Will also be replacing all of the thru hulls. They are original from 2005.
-
BTry this...
-
DDA1977 replied to the thread Scupper hoses.Based on recent survey, no signs of delamination or transom flex. But I agree that the transom needs some attention very soon. Planning...
-
Sseasick replied to the thread Canyon Key Fob.I am guessing: Look at the side seams for a groove that a coin like a quarter would fit. Insert the coin and twist. You may need to...
-
Sseasick replied to the thread New Grady-White Freedom 265.I think I rad that the max HP for the new model is 400.
-
Dafter replacing the drain hoses and deck drains in my boat, i can tell you that it would have been easier to wrap with tape. at least...
-
Ekea replied to the thread Scupper hoses.after replacing the drain hoses and deck drains in my boat, i can tell you that it would have been easier to wrap with tape. at least... -
Mmleads310 reacted to DennisG01's post in the thread Can’t reach lower transom mounting bolt!! with
Haha.
We call them "Bilge Monkeys" :) -
SeanC replied to the thread Scupper hoses.If your thru-hull fittings are plastic and original, you greatest risk isn't your hoses suddenly failing but your thru-hull fitting... -
DYou could plug the bad one from the outside until you can fix it. Wood bung or a nerf plug... Those hoses with the wire in them are...
-
GI just saw that Grady-White is planning to introduce a Freedom 265. Looks like it's going to be powered by twins (200s or 250s?) but...
-
SkunkBoat replied to the thread Scupper hoses.You could plug the bad one from the outside until you can fix it. Wood bung or a nerf plug... Those hoses with the wire in them are... -
