Latest activity
-
DDiad replied to the thread 265 Express center rigger.I’ll look into this but in my mind the halyard will be inside so it could interfere with grabbing the rod in the holder upon strike...
-
DDiad replied to the thread 265 Express center rigger.I’d rather not tie up a rod holder and the center rigger base is already there.
-
HHMBJack replied to the thread Generator removal.I put a 4D sized AGM in that generator space for added 12V battery capacity (now my Bank Two). My Bank One are the 4 Group 27's...
-
Hookup1 replied to the thread 265 Express center rigger.Why don't you put a heavy rod or even a wooden broom handle in the center hardtop rod holder with heavy line and a release clip. Clip... -
kirk a replied to the thread 265 Express center rigger.Not a 265, but on my 330, I run the center halyard to the base of the middle rod holder on the port side. It is slightly forward of the... -
DDoes anyone with a 265x use a center rigger? I have bungee clips in two locations on the hardtop for the halyard but that makes it...
-
Ffamily affair replied to the thread Do you know your buttock location?.Ultimately I wonder how close bunks need to hit on these points. Grady hulls are so thick that I can't imagine being off +/- 4" would...
-
FI interpreted the buttock data to show the distance form the various stringer off of the keel. In other words, where the bunks would be...
-
HHalfhitch replied to the thread Do you know your buttock location?.Yes, that's what I envisioned also. Then as each of those lines progress forward they start curving up to form the angled bow.
-
HI interpreted the buttock data to show the distance form the various stringer off of the keel. In other words, where the bunks would be...
-
Sseasick replied to the thread Forward Bilge pump float question.If if doesn't go to the pump electrically, it isn't the float switch for the pump. Physically you may not have a physical wire that...
-
Sseasick replied to the thread Do you know your buttock location?.I interpreted the buttock data to show the distance form the various stringer off of the keel. In other words, where the bunks would be...
-
HHalfhitch replied to the thread Do you know your buttock location?.Now you're getting in to lofting a boat. My mind has trouble visualizing all the relationships of the different lines involved, but the...
-
Sseasick replied to the thread boat seat swivel bushing.If you mean the cylindrical plastic bushing that slips over the pedestal, yes. It is most likely a 2 7/8 seat bushing with a lip and is...
-
CCrumbod replied to the thread Crab pot puller.So I am coming from an Aluminum boat. Did you thru bolt the base or tap into the fiberglass? TIA
