Latest activity

What's new Featured content New posts New media New media comments New profile posts Latest activity
  • Msp381
    Msp381 posted the thread Failed through haul fitting? in General Discussion.
    Please take a look at the picture and tell me if this is a sign of a bad through hull fitting. I have not looked at it in person or done...
    • IMG_6835.jpeg
  • kas919
    kas919 replied to the thread Hard Top Courtesy Lights - Freedom 285.
    Thanks again!!!
  • D
    DennisG01 replied to the thread Forward Bilge pump float question.
    See the part I wrote about the dash. That's how you can find the other ends of the wire - ohm them if you need to in order to confirm...
  • ROBERTH
    ROBERTH replied to the thread Bow eye hook crack.
    When I got my Grady, it had the lift ring system that went up through the pulpit and down to the eye and had a huge stainless steel...
  • J
    JohnL replied to the thread Forward Bilge pump float question.
    There are two brown wires coming off the switch and a brown and yellow off the pump. The issue is that they run under the...
  • H
    Halfhitch replied to the thread Do you know your buttock location?.
    All I really know about Lofting a boat is that I should not worry about those Buttocks that belong in a designer's head but worry about...
  • W
    wspitler replied to the thread New Canvas - what to do.
    Depending on your temperature, let your Canvas hang for a day or two before you install the snaps. It will stretch out and the Canvas...
  • Seafarer_Bob
    Seafarer_Bob replied to the thread 12v question.
    Yes, the starting battery is isolated with an ACR switch. The 36v to 12v stepdown in the link above to amazon is 30amp, that's probably...
  • JJF
    JJF replied to the thread New Canvas - what to do.
    for placing the snaps I have some you are welcome to borrow, https://www.sailrite.com/Quick-Fit-Pin-Socket-Snap-Positioning-System
  • Hookup1
    Hookup1 replied to the thread 12v question.
    I wouldn't connect converter to the battery and charging shunt. You will have a voltage difference and current will flow. May actually...
  • Ekea
    Ekea replied to the thread New Canvas - what to do.
    i do the same. i feel this is the best way. my canvas guy just gave me a few extra pieces of the track
  • kirk a
    kirk a reacted to HMBJack's post in the thread Generator removal with Like Like.
    I put a 4D sized AGM in that generator space for added 12V battery capacity (now my Bank Two). My Bank One are the 4 Group 27's...
  • kirk a
    kirk a reacted to Halfhitch's post in the thread Fender Locks with Like Like.
    Clove hitch is always ready.
  • D
    DennisG01 replied to the thread Fender Locks.
    So "not" the Taylor Made ones? Which Taco locks are you referring to?
  • C
    Crumbod replied to the thread Crab pot puller.
    I might get my son in law to print some for me
Show older items