Latest activity
-
Ekea replied to the thread Recommendations for mat for stern of boat when boarding to be over swim ladder??.does the ladder sit flush with the tread surface of the swim platform? -
Ekea replied to the thread Fender Locks.im still not sure whats wrong with hanging a fender from a cleat. been doing it since i was a kid
-
Ekea replied to the thread Scupper hoses.if you really want to get fancy, go with scandvik clamps. they have slightly rounded cross section so the edges dont dig into the hose...
-
Think about using a better hose. I used 1.5" Series 148 PVC hose. There is no metal in them. Not rubber. Smooth surface inside &... -
KKoakine88 replied to the thread 2021 Adventure 208 Build.Update: The heavy duty dual lock velcro was not strong enough to hold up the lifejacket bag. The adhesive just simply isn't strong...
-
-
Ky Grady replied to the thread How to oblong a hole?.For a little more time consumption, can always use a rat tail file. The rat tail has come in handy quite a few times over the years to... -
Jjchip14 replied to the thread Fender Locks.I am not a fan of taylormade or taco, Dennis
-
DThink about using a better hose. I used 1.5" Series 148 PVC hose. There is no metal in them. Not rubber. Smooth surface inside &...
-
DDennisG01 replied to the thread Fender Locks.Still waiting on a reply to the suggestion. I don't know you, but this is kinda rude, now There's other ideas to offer - but I don't...
-
Seafarer_Bob replied to the thread NJ fishing reports.Not NJ but I'm in OBX for a while and caught a few decent Gaffers Monday. Ran out of Oregon Inlet and fished south towards Hateras. -
-
SkunkBoat replied to the thread Scupper hoses.Think about using a better hose. I used 1.5" Series 148 PVC hose. There is no metal in them. Not rubber. Smooth surface inside &... -
Hookup1 replied to the thread Pulpit repair.Harbor Freight has large screwdriver blade ratchet set. Inexpensive and helps to get the 4 large flat blades unscrewed. Getting the... -
DDA1977 replied to the thread Scupper hoses.Rob, Thanks for the detailed info! Hope you are recovering quickly to get back out on the water. I will put the deck plate in the same...
-
DDleigh18 replied to the thread Swapping out F250 Yamaha for BT350 Honda.Picking up tomorrow 5/21/2026 The trim limit switch gets it out of the water!! Sweeet! Although HONDA puts a zinc in the water...
-
DDleigh18 replied to the thread Swapping out F250 Yamaha for BT350 Honda.With the trim limit switches properly set the engine clears the water and also obvi does not hit the transom...... LOVE LOVE...
