Latest activity
-
SkunkBoat replied to the thread Light Cut Suggestions.3M Finesse It 2 works pretty good for what you describe. Then needs wax... Oh....not done by hand.... forget my recommendation...I... -
HHalfhitch replied to the thread Light Cut Suggestions.https://www.northerntool.com/products/meguiars-marine-rv-one-step-clean-polish-compound-32oz-model-m6732-5249892?ogmap=SEM|DSA|BING|STND|...
-
SWhat are you using for a potti on a Fisherman 180? With fresh water shower doesn't seem enough space in console for a 5 gal bucket...
-
i want to do the interior vertical surfaces. i think i want a light polish (little/minimal cutting) i probably could just wax/seal it... -
JJF replied to the thread Grady Touch up paint.I have the formula for the paint. I had NAPA mix it up and put it in a spray can. $35 -
Jjchip14 replied to the thread Grady Touch up paint.I a looking for sea glass green gel coat touch up paint - anyone recommend where I can find touch up pens or something similar?
-
FFather's Day replied to the thread Polishing fuel.Yeah I'm a couple of hours away from home so using the gas outside the boat isn't a option. For $600 I thought it was a good option...
-
SkunkBoat replied to the thread Polishing fuel.If you have ~200 gals of 1 year old (or older?) gas you are better off removing it and burning it in cars & lawn mowers(assuming it is...
-
Iigblack87 reacted to Dleigh18's post in the thread Swapping out F250 Yamaha for BT350 Honda with
Like.
they are claiming on my 25cc 3 miles to the gallon! Not sure you can get better than that. They use a 2 stage/step cam for lower end... -
FFather's Day replied to the thread Polishing fuel.Did they take your senders out and get to the bottom of the tank? The boat's in 88 and he said typically in his experience there'll be a...
-
SSeaVee replied to the thread Polishing fuel.I had my auxiliary tank polished when I bought my Grady White as the prior owner never used it. It’s pretty impressive how they can...
-
DDleigh18 replied to the thread Swapping out F250 Yamaha for BT350 Honda.O she does, skinnier than the old 250 but definitly taller! Looks like the 600hp merc on a 43 tiara! hahah
-
DDennisG01 replied to the thread Polishing fuel.Can you polish gas? I thought only diesel could be truly polished? But... do this... take the fuel filter off and dump it into a clear...
-
Ekea replied to the thread Swapping out F250 Yamaha for BT350 Honda.wow, that engine looks really big compared to the boat...
-
Sardinia306Canyon reacted to Dleigh18's post in the thread Swapping out F250 Yamaha for BT350 Honda with Like.
So just picked her up and have not launched her yet too tired...... The motor just clears the storage bin/Back of transom when the...