Latest activity
-
wahoo33417 replied to the thread Scupper hoses.I don't see a problem with a quality 8" plate. I believe their is room - but double check! The dealer just went with the smaller plate... -
wahoo33417 replied to the thread Trim tabs getting damaged when forklift lifts boat.Sorry to revive a two-year old thread. But I'd like to know if you're still happy with your cut-down trim tabs? If so, how did you go...
-
Ffamily affair replied to the thread Loose steering wheel.Well, I finally got around to this project on the 2005 270. I thought I'd include a couple details that might avoid a headache: If you...
-
-
AHelp! We are nearing completion on a stringers-up restoration of a 94 Sailfish. We took it apart so long ago we can't remember how to...
-
FFather's Day replied to the thread Polishing fuel.Yeah she runs fine, no issues at all, 88 tanks must have a interesting bottom, so having the tank cleaned is more of a concern polishing...
-
Sseasick replied to the thread Bilge pump wiring woes.correct. I guess I missed that part of the layout:).
-
JJF replied to the thread Light Cut Suggestions.https://www.meguiars.com/marine/products/meguiarsr-marinerv-one-step-cleaner-wax-m5032-32-oz-liquid -
SkunkBoat replied to the thread Grady Marlin Livewell gas shock.Taylor and Ameritool -
SkunkBoat replied to the thread Bilge pump wiring woes.Yeh....Thats obvious.... But you don't need a switch position for auto
-
Sseasick replied to the thread Bilge pump wiring woes.The auto/manual function is there to provide pump out of the bilge when the auto function doesn't work when it should. Manually...
-
S2019 Suzuki 4-stroke 840 hours (recently service, runs flawlessly) $16,500 1994 Sea V2 hull Two biminis for full shade Downrigger and...
-
-
SkunkBoat replied to the thread Polishing fuel.I agree I would not burn bad gas in my car. He said the boat ran fine. I'm going under the assumption that the gas is usable. It has...
-
Hookup1 replied to the thread Bilge pump wiring woes.Check owners manual on GW site. It's likely a brown/black wire coming out of the harness. Check connection to the bilge pump - the... -
-
SkunkBoat replied to the thread Bilge pump wiring woes.Was the original switch an Auto/manual? My Grady and many others only had a Manual switch. The "auto" float switch was fed from a...
-
Hookup1 replied to the thread Polishing fuel.Burning old gas that may have phase separated in your car is a bad idea. Boat's have better ability to filter the fuel and extract the...
