Latest activity

  • D
    drbatts replied to the thread Refrigerator....
    Fridges are useful especially if your boat is kept on shore power. You will always have cold beer. Most fridges I have seen on...
  • wahoo33417
    wahoo33417 replied to the thread Potti for Fisherman 180.
    We had the Spirit 175 - the predecessor to your 180. We put a port-potta in the center console. And the rule was whomever used it had to...
  • wahoo33417
    wahoo33417 replied to the thread New 285 Freedom on the way!.
    Enjoy!
  • wahoo33417
    wahoo33417 replied to the thread Refrigerator....
    In my opinion, usefulness depends on how your boat is stored. If your boat is stored with shore power, then you can load your fridge...
  • L
    I find threading my rod tips through the gunnel Gromit to be a hassle. I’m looking to put Rod tubes inside of the gunnel so it doesn’t...
  • Gulffishin
    I know it’s been a while, but just to wrap up the gaps for posterity, I ended up getting the 6y9 fixed by gauge savers. It turned out...
  • dogdoc
    dogdoc replied to the thread raymarine suzuki communication.
    currently all engine data comes from smg4 gauges, no info on the raymarine or garmin mfd as neither is connected to the suzuki backbone...
  • SkunkBoat
    SkunkBoat replied to the thread raymarine suzuki communication.
    what will you get on Axiom that you don't already get on 9" garmin and 9" Raymarine? You can connect zuke to N2k but you need an N2k...
    • Screenshot 2026-05-24 at 9.27.40 PM.png
    • Screenshot 2026-05-24 at 9.34.42 PM.png
  • SkunkBoat
    SkunkBoat replied to the thread Automatic Trim Tab Controls.
    So I can't find the threads were we lamented 265 express trim tabs. Must have been someone elses thread. I would have tagged it 265...
  • T
    Too Tall replied to the thread Automatic Trim Tab Controls.
    Thanks Dennis. I don't know what make the current manual ones are but I'll look into Bennett and Mente.
  • SkunkBoat
    SkunkBoat replied to the thread Automatic Trim Tab Controls.
    265s have special short actuators. The sensor in the new kit won't work on the existing pistons. the shaft is short. I looked into it...
  • SkunkBoat
    SkunkBoat replied to the thread Bilge pump wiring woes.
    Ok if we’re going to figure out what is specific to your boat, we need more information. Which one of those crusty green switches in...
  • dogdoc
    West Marine has the 5x points again and am thinking of upgrading my 9 in garmin to a 12 in raymarine. I already have a 9 in raymarine...
  • D
    DennisG01 replied to the thread Automatic Trim Tab Controls.
    I suppose it depends on what brand tab system you have. Bennett? At a quarter century old, it could be anything. Assuming Bennett...
  • DoctorOctopus
    DoctorOctopus reacted to SkunkBoat's post in the thread Bilge pump wiring woes with Like Like.
    Yeh....Thats obvious.... But you don't need a switch position for auto