Latest activity

What's new Featured content New posts New media New media comments New profile posts Latest activity
  • D
    DennisG01 replied to the thread Motor well scuppers.
    If the inside rim has broken off from corrosion, it's reasonable that the other side will in short time. Don't do a band-aid repair...
  • K
    kevgle posted the thread Motor well scuppers in General Discussion.
    Trying to send pics the scupper on back of transom for the motorwell.On the inside The brass piece has corroded off .Its above the...
    • 20260703_161249.jpg
  • H
    Halfhitch reacted to Coastboater's post in the thread Ignition Problem with Haha Haha.
    I’ve never done that 3 times :)
  • C
    Coastboater replied to the thread Ignition Problem.
    I’ve never done that 3 times :)
  • B
    bcoco replied to the thread Ignition Problem.
    done that after anchoring. just shut off key and forgot it was in reverse.
  • D
    DennisG01 replied to the thread Windlass power.
    Along the lines of what Seasick said, the windlass, itself doesn't NEED a latching solenoid. Having/not having foot switches is also...
  • S
    seasick replied to the thread Ignition Problem.
    As mentioned we have all probably been in the same situation. After years of boating, it still happens every now and then. The...
  • S
    seasick replied to the thread Windlass power.
    Some installations dont have a relay but that is determined in most cases by the amperage draw of the windlass. If you look up the...
  • L
    loubeer reacted to wspitler's post in the thread Ignition Problem with Like Like.
    I think we’ve all done it once. I now remember it! Sorry you had to go through all of that to remind us all.
  • C
    Capt. Dave replied to the thread Windlass power.
    If there is no foot switches or remote, does it need a solenoid?
  • wahoo33417
    wahoo33417 replied to the thread Ignition Problem.
    You're not alone. I've done it also. Except I called the dealership from the boat ramp, who walked me through all the 'obvious' stuff...
  • S
    seasick replied to the thread Windlass power.
    If the wires that connect to the switch are not large gauge conductors, there is a relay somewhere
  • D
    dstarok replied to the thread Hardtop Cracking pretty good on both sides.
    Had starboard side crack. I had it welded and it cracked again in a short time. Had it redone by pro T- top welders with a sleeve welded...
  • D
    dstarok reacted to SkunkBoat's post in the thread Hardtop Cracking pretty good on both sides with Like Like.
    There are most likely wires in rear starboard leg and across rear horizontal if you have spreader lights. Also wires in any pipe from...
  • C
    Capt. Dave posted the thread Windlass power in Tips, Modifications and Electronics.
    2005 Marlin with no power to the windlass. Replaced the 35 amp breaker and up/down switch. Windlass is a Simpson Lawrence 600 sprint...
Show older items