Latest activity
-
Bboslaw replied to the thread Seat Glides source.I used PLA. I think it’s tough enough to last a while for this application.
-
HHalfhitch replied to the thread Seat Glides source.Now, that is really cool. Is the material tough stuff?
-
BI got tired of looking for these so I modeled and 3D printed a pair for my 1997 208. If anyone needs these I’ll print and sell for $6...
-
-
CCapt. Dave replied to the thread Windlass power.Appreciate all the input. Windlass was factory installed with appropriate wiring and 35 Amp breaker. I can't find the solenoid. It's...
-
Kkevgle replied to the thread Motor well scuppers.Thanks for the feedback.Wish i would have noticed this while still on land.Looks like an easy fix.
-
Ekea replied to the thread GPS Antenna ?.at the risk of derailing this thread, why does the SKR need highly accurate gps input? i assumed the only gps input to SKR was speed... -
Ccap replied to the thread Ignition Problem.For, what it's worth, you now know it works as it should.
-
Zzom replied to the thread 180 Sportsman drop in boxes.Long shot I'm guessing but do you still have the pictures by chance?
-
Lloubeer replied to the thread Motor well scuppers.I had replaced the brass drain tubes twice on my 2003 Express 330. Then my repair facility suggested using thick wall fiberglass...
-
I just got a flag pole and mount. It screwed right into hard top. -
DDennisG01 replied to the thread 226 Seafarer anchor light wire.Windshields are actually pretty simple to take apart. I highly doubt the wire is secured inside the windshield... but any sharp bend...
-
DoctorOctopus replied to the thread Flag/Burgee options.I drilled straight into the 1/2" flagpole rather than a set-screw. set screw appears to be 1/4-28 but I will double check tomorrow... -
DoctorOctopus replied to the thread Anchor light.seafarer is 22 not 23 feet long. My boat gets bigger when I talk to other boaters and smaller when I negotiate my slip fee.
-
DoctorOctopus replied to the thread Anchor light.perko sells the light. I suggest you replace the bulbs with LED. there is a bent one at the base, and another bent at the head to...
-
DoctorOctopus replied to the thread 226 Seafarer anchor light wire.I have the same issue. I am getting the feeling that pulling the wire through is impossible and that some kind of new secured wire or...
