Post your SeaDek/similar photos!

Angler Management

Angler Management

GreatGrady Captain
Joined
Jun 15, 2014
Messages
302
Reaction score
26
Points
28
Location
Washington State
Model
Marlin
Trying to pick a color for my cockpit etc... I'm horrible at colors. I'd like to see some of your samples! Thanks! Randy
 
I went with Storm Gray over Black for my SeaDek that I'm putting on my swim platform and cabin step and floor. Haven't installed yet due to cold temperatures. Will be doing 2 more pieces for my box tops in the aft corners. Not doing the floor because of the catfishing that I do and the horns could gouge the floor.

20210828_090611.jpg20210828_090656.jpg20211207_140828.jpg20211207_141012_copy_1160x1783.jpgScreenshot_20211207-142126_Gallery.jpg
 
  • Like
Reactions: Angler Management
Hard to tell, but the storm gray is darker than these pics show.
This fish ruler is StormGray-Black SeaDek that I have on my boat.

Screenshot_20211207-190323_Gallery.jpg
 
  • Like
Reactions: Angler Management
Dekit
 

Attachments

  • IMG_20211001_125301_01.jpg
    IMG_20211001_125301_01.jpg
    1.8 MB · Views: 35
  • PXL_20210720_143929146.jpg
    PXL_20210720_143929146.jpg
    2 MB · Views: 35
  • PXL_20210720_152256717.jpg
    PXL_20210720_152256717.jpg
    2.1 MB · Views: 38
I used a product called FlexDek. I’m very satisfied so far.
 

Attachments

  • E1400DC6-B59B-40C0-85FE-DFC995A1E027.jpeg
    E1400DC6-B59B-40C0-85FE-DFC995A1E027.jpeg
    950.6 KB · Views: 34
  • E3F4DCFF-1538-4371-A50D-107771650E7E.jpeg
    E3F4DCFF-1538-4371-A50D-107771650E7E.jpeg
    956.6 KB · Views: 35
  • CBCB0A51-0012-4112-A9DB-107327D8FFD5.jpeg
    CBCB0A51-0012-4112-A9DB-107327D8FFD5.jpeg
    874.7 KB · Views: 38
  • Like
Reactions: Angler Management
Rather than trying to repair small dings and paint chips, I'd like to put a similar product on my GW factory installed Armstrong bracket/platform made of aluminum, but concerned that it could hold moisture underneath it allowing the aluminum to corrode.
 
I'm not sure about moisture under the barrier... good thing to check into. I know several people who have applied this to their aluminum floors and have heard no complaints.

Anyone have experience with the SeaDek HD? Limited colors, but supposedly more durable which is probably a good thing with my typical crew...
 
Angler Management said:
I'm not sure about moisture under the barrier... good thing to check into. I know several people who have applied this to their aluminum floors and have heard no complaints.

Anyone have experience with the SeaDek HD? Limited colors, but supposedly more durable which is probably a good thing with my typical crew...
Click to expand...
I believe that is the same as the Dekit. It's a more durable surface than the original SeaDek. You can find it on the Freeman's. Just remember to keep dogs off any of these products.
 
  • Like
Reactions: Angler Management
I was interested in Seadeck for my 228 and they came out and measured and gave me a quote of over $7K and I passed. What are you paying and are you having a pro install it? That almost $8K was with them doing everything.
 
luckydude said:
I was interested in Seadeck for my 228 and they came out and measured and gave me a quote of over $7K and I passed. What are you paying and are you having a pro install it? That almost $8K was with them doing everything.
Click to expand...
That sounds like more than twice the going rate here in Florida.
 
luckydude said:
I was interested in Seadeck for my 228 and they came out and measured and gave me a quote of over $7K and I passed. What are you paying and are you having a pro install it? That almost $8K was with them doing everything.
Click to expand...
I paid about $1200 for mine. It's a little high for the amount I did but I have double thickness in the bolsters. I believe the swim platform would have been about $400 and that was normal thickness. You could use that $/sqft to give an idea of cost.
 
I used Aquatraction on my 282. Everyone loves it, the only slight annoyance is that it’s a little warmer on those really hot days. No stains or scratches and it was beat on all summer long.

Price was around 3k and I did the whole boat. Even the swim platform. 492391A2-AA08-4AFD-A45E-EA93FD74C7DF.jpeg7E940ED1-B796-465B-B459-793BAC8B879C.jpeg6E08D7B7-0F7C-45CB-97DA-24D5A994DD76.jpeg
 
  • Like
  • Love
Reactions: Sdfish, SkunkBoat and Ky Grady
I've got $436 in my swim platform and cabin step and floor from SeaDek. I'll be doing the two box covers also, so a little more investment.

ItalianAngler's 282 turned out fantastic. Looking forward to get my few pieces installed this spring.
 
You must log in or register to reply here.