Recent content by CaliGrady25

Thanks. Yeah no lifting from there for sure. I added some oval pieces in the big hole as well as marine plywood. I got lazy and did not feel like sanding down the surrounding glass. I am adding the roller as well as the 1/4 inch stainless you see in the pic below. I have aner piece I will add...

Yes. Looking up from the access port in the cabin. The black tape is covering the hole in the deck/bow that the anchor line falls through (epoxy and fiberglass to close that up so I can add an anchor roller.

Thanks for the reply. I am assuming these holes came from the factory due to the supports directly behind the holes which have factory foam around them.

I have four screw threaded screw holes just above the deck (2 kn each side. See pics) that I am not sure what they are for. Inside the anchor locker there are two foam insulated protrusions directly behind the scree holes. Any idea what might attach here? Looks like the foam cracked on both of...

Thanks

I have 5 of these brackets (see picture) around the back of my 25ft Sailfish. 2 on SB, 2 on Port and one in the middle of my transom wall. Any ideas what they are for? I feel like I am missing something.

Thanks!