Recent content by Captain Overkill

https://www.integritymarinecorp.com/ Search for F8252 for Grady White Trim

Glad I could help. The "heat" really helped going around bends without having to cut the trim. Attached are pictures where I was able to make turns without joints. There are small gaps in some corners behind the seats. I just filled the gaps with White 3M 4200. NOT the 5200!!! Good luck !

Okay...first you need a good heat gun, sharp putty knife, plyers and a razor knife (new blades), and last but most important is patience. Heat the vinyl and slowly pull away using the plyers. The vinyl will be too hot to grab with your hand. If you have a second person you can slide the putty...

Item sold

To Handinpalm et al, I replaced the trim after trying a lot of different products. It still looked "stained". But the boat is well seasoned and it was time. Looks great now. Glad I did it. FYI...I used this trim on lots of places other than under the bunks. This is a very good deal for this...

The trim has adhesive tape on the back. Very Good adhesive tape I might add! If you buy the trim I can give you some tips on removal and install.

Grady White Vinyl Trim - Color is Grady Beige. Dimensions are 1.375 x .250 I just re-trimmed my Grady White Seafarer 228 with this flexible trim. This trim is used on a variety of Grady models in various locations. Attached are pictures of the finished re-trim. I had to buy in bulk so I'm...