Recent content by GET SOME

I have a 2018 Express 330 with twin 8616xsv screens. Access is tough but if you raise the hatch all the way up you should be able to get your arm in through the sides of the hatch and open the rubber cover on the back of the unit and insert or remove a micro SD card. Just be careful not to drop...

I installed 4 of these on the bow rail of our Seafarer and 4 are now installed on the bow rail of our Express 330. I used the 7/8”-1” size but this size should work as well. https://a.co/d/cPvKGUM

Looks like a newer Gulfstream with a single outboard. Such a bummer GW discontinued that model. Looking forward to the dual console fad being over some day.

I’ll sell you mine if you want them :p

Grady-White customer service saves the day again. “That carbon canister is behind the water heater. You can remove the panel under the starboard helm fold down seat; you will see the water heater. I also sent you a picture of the canister through the starboard cockpit speaker hole.”

Can anyone tell me where the carbon canister fuel vent is located and how to access it on the Express 330. I have a 2018 with the dreaded slow fuel fill issue. Hull side vents are clear and I’d like to potentially bypass the carbon fuel canister to rule that out. If that doesn’t work I’ll need...

Yoga mat for cheap easy and temporary

Looks good! I was gonna say powder coat it to match but it looks pretty nice and shiny as is! Question - did you install the bell under the port gunnel?

We are based out of Kona Kai this season. Lots of fish out there - bluefin, yellowtail, and now yellowfin are starting to show up. Get out there and Get Some!

What year Express 330 and what marina? We have a 2018 at Kona Kai in San Diego. Welcome aboard! I’ve been using this from Amazon: STAR BRITE Ultimate Vinyl Clean

You aren’t wrong on the access issues. I’m 6’ 5” and have issues. We installed a 100 gallon bait tank so you can stand on that and access everything. I also had a custom tower fabricated so I can be there driving and spotting fish and handing rods down to guys.

Looking good! I have a 2018 at Kona Kai with about the same hours. You moving up to something bigger? Good luck with the sale!

Our boats are twinning in SoCal.

Spun hubs on the props maybe? Something definitely ain’t right there. I have a 2018 with 300s in San Diego and I don’t use trim tabs at all to get on plane. Only use tabs if there’s a lot of weight on one side of the boat or running head into some crappy seas.