Hookup1's latest activity
-
Hookup1 replied to the thread One battery bank not charging.ProMariner was terrible before. Glass fuses. Back on charger after a days fishing you grab fuse holder and they were uncomfortably hot... -
Hookup1 replied to the thread Grady White Flush Port.Mine are plastic. Not sure they have ever been replaced.
-
Hookup1 replied to the thread One battery bank not charging.How old are the batteries? May be time to replace. What group/sizes are they. 4 batteries - look to see which ones are in parallel...
-
Hookup1 replied to the thread Grady White Flush Port.Melnor hose quick connects from ACE Hardware or online. Same parts only lees expensive.
-
-
Hookup1 replied to the thread 2005 Yamaha 250 four stroke water cooling question.Make up a y-hose for flushing - one side to rabbit ears and the other to the flush port. Snake out the tell-tale back into fuel cooler...
-
Hookup1 replied to the thread Why is mine so small?.Look at the Owners Manual for the wire list. Look for the high amperage connections possibly with inline fuse. You have a newer model...
-
Hookup1 replied to the thread Why is mine so small?.On my islander there are two power feeds from batteries to the helm/electronics box/overhead. The breakers/fuses are sized for short...
-
-
Hookup1 replied to the thread Courtesy Lights.Use search...lots of discussion on this topic. Search results for query: courtesy light
-
Hookup1 replied to the thread Quite possibly the greatest invention in the history of GW boats.Let's get some competition going... Threaded plastic ferrule to tie throttle/shift cable together(old and new) to pull thru conduit...
-
-
Hookup1 replied to the thread Bent rocket launchers.It will break off. Talk to a welder. Replace it if he can't repair it.
-
Hookup1 replied to the thread Side Power Bow Thruster.On my Vetus bow thruster it is behind the prop in the lower unit. This is where it should be on all bow thrusters. Pulling the motor...
-
Hookup1 replied to the thread Side Power Bow Thruster.What model SidePower thruster do you have? SidePower does not have a shear pin on the back side of the propeller. Instead it is under...
-
-
Hookup1 replied to the thread Original Panda 8kW witing harness..Looking at your boat layout and where the conduit tubes are there are places where cable are going to be ties to the boat. For example...
-
Hookup1 replied to the thread New Facebook Group - non AI.So this appears to be an AI response to a GG post "Where is the ground?". Arish12: Where is the Ground? is a powerful question that...
-
Hookup1 replied to the thread Where is the Ground?.Thanks for that insightful explanation or where the ground wires for the bilge pumps are. We are all searching for that mysterious...
