Hookup1's latest activity

  • Hookup1
    Hookup1 replied to the thread Combo fuel/vent filler.
    Tank is probably leaking. Stuff access plate area with paper towels and fill tank. Rock the boat for a while and check the paper towels...
  • Hookup1
    Hookup1 replied to the thread Correct prop size.
    Hookup1 said: I have been running a 268 Islander with twin Yamaha f-150's with 17 x 14 1/4 3-blade Yamaha Reliance stainless. Generally...
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    The GW EuroTransom is equivalent to a bracket that has a swim platform over it. AI overview: A euro transom is a boat's stern design...
    • Screenshot 2025-11-01 at 8.04.08 AM.png
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    Yes that is my boat - older picture before it was painted blue.
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    My hull is not stepped. SeaV2 hull with a EuroTransom.
    • Eurotransom 268.jpeg
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    Your stringers are shot along with the transom. The reason you have movement in the transom is the stringers are wet and separated from...
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    You have the u-channel. Yes I have the stepped “Euro Transom”.
  • Hookup1
    Hookup1 replied to the thread Transom Construction.
    Temporary hack to keep the transom top from flexing.
    • IMG_1445.jpeg
  • Hookup1
    Hookup1 replied to the thread Engine flush connector FIX.
    I know yours are built in. Try different o-rings or call manufacturer. I have read a number of posts that have trouble.
  • Hookup1
    Hookup1 replied to the thread Yamaha Command Center CL7.
    When someone says they "shorted out" something it's a clue for me that they need to bring a professional in.
  • Hookup1
    Hookup1 replied to the thread Engine flush connector FIX.
    McMaster Carr - try different o-ring sizes. No problem with my Melnor garden hose quick connects!
    • Melnor Hose Connect.png
  • Hookup1
    Take the seat off and exercise the seat base and actuator! Make sure the base is working 100% before re-attaching the seat.
  • Hookup1
    It was lose connections at the battery. They were also super corroded and dirty. Got it all cleaned up and started right up. Hookup1 you...
  • Hookup1
    Hookup1 replied to the thread 192 Tournament 2000.
    I don't know the boat. Gravity can be a bitch though! GW would have never shipped a boat this way. Something is changed/different.
  • Hookup1
    Hookup1 replied to the thread 192 Tournament 2000.
    The cockpit deck and drains are/should be above the waterline. The drains connect with a short hose to a below the waterline fitting...