Recent content by pmgia

  1. P

    2021 Suzuki 300 on 2001 Advance 247

    I found this page today on the Simrad
  2. P

    2021 Suzuki 300 on 2001 Advance 247

    I’ve not really had a chance to figure out all the numbers but I LOVE the low fuel burn and I’ve hit 43 kts. I think I am a hole or two high, I’d drop it all the way down or 2nd hole. IM me a number if you want to text or have specific questions
  3. P

    Dome Light / Spreader Switch Assembly

    This is what I purchased. White/Red, I had it in my last boat, works great. You can buy anywhere, prices vary and change. I ran a wire down to my panel for the spreaders and put them on a spare toggle switch on the dash. https://www.lumiteclighting.com/touch-dome-led-light.html
  4. P

    Deck delamination

    Yeah, that’s different. I would open all the access holes and run a fan for a few days to help dry it out. First figure out where the water is coming from.
  5. P

    Deck delamination

    Sorry, I had it done. They drilled two small holes, one on each end. They blew air in one hole and no moisture came out so the assumption is delaminated due to dry mold (not enough epoxy when glass together). Then they pumped in some epoxy mixed with filler until it came out other end. Then they...
  6. P

    Deck delamination

    I had a similar spot. I had it injected. Two small holes, one for injection and one for air release. There was no moisture it had simply delaminated- likely not wet enough when the fabric was laid. I would not ignore it. It will only get worse it won’t get better and likely won’t “stay the same”.
  7. P

    305 Express Simrad AP44 Install

    I saw one mounted in the Ebox, above, their radios were below. Is it a precision 9?
  8. P

    Dome Light / Spreader Switch Assembly

    I just replaced this, it works, the boot on the spreader is a bit saggy but I put in a different light and moved the spreader switch. The previous owner put in an led bulb. $40 shipped to lower 48
  9. P

    247 Advance - Head removal

    There should be a cover you remove in your center console aft near floor, it’s all in there.
  10. P

    2001 247 Advance with 2021 Suzuki 300

    I love this boat.
  11. P

    247 Advance - Head removal

    Disconnect the two hoses on the back and pull it out. Make sure the seacocks closed, I zip tied mine, I put in a portable head that has to be manually dumped, usually in the toilet when I get home. Pretty easy job. I left the macerator but pulled the breaker.
  12. P

    Grady Transom inspection

    Mine looked like that and turned out fine. We pulled the motor and the bang plate and the shop inspected it. Used a PVC bang plate when I hung the new motor.
  13. P

    F/S Full Canvas Enclosure 247/257

    I have a 2001 247 Advance. I’ll include everything. They are “tracks” that attach to the hull, that it slides into. You may need to add snaps to t top, mine are riveted in so I can’t remove easily. Everything else was attached by screws is included. I’m in Central Florida and sent an email. If...
  14. P

    List to Starboard under power

    Check this out if it is a bigger HP motor then you are used to. https://en.wikipedia.org/wiki/Propeller_walk