SkunkBoat's latest activity
-
SkunkBoat replied to the thread 01 transom look ok? 258.The inside cracks by themselves are nothing. That gel goat always cracks The outside crack in the corner is not unusual. The gelcoat... -
SkunkBoat replied to the thread 20 year old Boat Loan Information.or don't borrow $400K to buy a brand new boat when you can get the same size boat 20 yrs old with brand new motors and electronics for...
-
SkunkBoat replied to the thread 20 year old Boat Loan Information.So, you are worried about getting a "boat loan" for an old boat because when you sell it, no one will be able to get a "boat loan" for...
-
SkunkBoat replied to the thread Copper Steering Lines.BOAT Break Out Another Thousand Do you have Autopilot? .you don't want to get some new to match old and then have to change...
-
SkunkBoat replied to the thread Copper Steering Lines.If it was me ...I would replace with new Seastar hose. I would consider new cylinder and helm too. 30 years is a long time if still...
-
SkunkBoat replied to the thread 265 Express overhead Rod holder.are those the original halogen spreaders? dude.... :rolleyes:
-
SkunkBoat replied to the thread Mold cleaner recommendations for caulking.That picture is exactly what I was talking about with the 4200 on the gunnels. In that spot, they are using 4200 for its adhesive...
-
SkunkBoat replied to the thread 265 Express overhead Rod holder.You could try moving it from the "over the top" to "under the top" with a spacer to get past the lip. That won't cost anything but time...
-
SkunkBoat replied to the thread Wiring in GW 235 - neat or tangled?.If you are posting from an iPhone you can reduce size of pix and change format to jpeg You have to change this Before you select the image
-
-
SkunkBoat replied to the thread Yamaha F150 troubles.VST filter injectors plug coils,, take a coil off the good motor and rotate it thru positions in the bad motor....
-
SkunkBoat replied to the thread Mold cleaner recommendations for caulking.I have found that 4200 gets mildew stains. Grady used it in a few spots...hardtop, pulpit... I made the mistake of resealing one of the...
-
SkunkBoat replied to the thread Oldest 232 Gulfstream owner with original fuel tanks ?.No one can really naswer your question. Your tanks are your tanks. They lived their own life. The Grady Model doesn't matter. The fact...
-
SkunkBoat replied to the thread New Batteries.I have had an intermittent bad switch caused the same clicking as you describe. The tell was that when you tightened/loosened the nut on...
-
SkunkBoat replied to the thread Lewmar Hatch Express 265.You mean Bomar Hatch. readily availbe from WM,Defender,etc. They usually list outer dimension of lid and the cutout size
-
SkunkBoat replied to the thread Hydraulic Steering Cables.So...that is some really old stuff. Does it steer? You have fittings in the motorwell. So yes you just need the 3' hoses(or same length...
