Recent content by Socalinsd

SOLD

REDUCED to 49.9K......

2004 Grady-White Gulfstream with SEA V2 hull 9'3" beam, bracket and 2009 Yamaha F250 with 940 hours. Typical cruise 27-28 mph. MPG 1.8-2.2 depending on load and sea state. Step down cuddy, with sink and freshwater sink, sleeps 2 with foldable upper bunk. Porta potty with pump out macerator. All...

Keith where did you get those bait tank hoses, West Marine?

That definitely helps thanks. Do all the gulfstreams come with with 2 factory water pickups?

Hi there, do you happen to have a link to that 232 Grady? I'm looking at a possible upgrade, thanks!

As much as I love my 208 adventure, I'm finally ready to move up a bit in size. (2 foot itis!) Anyway, I just had a sea trial completed on an older 232g (SeaV2) I'm thinking about purchasing. It has twin 150 4 strokes (487lbs each) on it and the scuppers are pretty much underwater by a good...

You will be underpowered with twin 70s. The single lightweight 150 is the bare minimum and two 70s would weigh more than the 150 and also present more drag than the single. The extra weight will push the hull lower also adding low speed drag and maybe submerged scuppers depending on the hull...

Frustrating indeed that's how it was out here in the late 90s early 2000s, very rare to catch a legal 22" halibut. Now that the commercial pressure has been substantially reduced, the stock is making a great comeback. Our limit in socal is 5 22" fish per day. You can catch them all year but gets...

My bad, it is a Reliance SDS prop. http://www.simyamaha.com/mobile/Product.aspx?ProductCode=68F-45970-10-00

I'm originally from the northeast and used to love catching flounder, rarely got any legal fluke though. Our halibut fishery has been getting better every year since the gillnet ban back in the late 90s. A lot of rec guys out here don't even target them. Last year we had triple digit bluefin...

My prop is a stainless steel Yamaha SDS 14 1/2 x 15p 3 blade. It wasn't cheap, around $450 from Sim Yamaha and they usually have the best prices on Yam parts. Probably could have gotten a Reliance much cheaper but didn't price those. Good luck with it..

Sorry for the delay trap, here is the info. My F200 inline 4 is mounted 3 holes down from the top. I gained 300 rpm on the switch from the Yamaha 17" SDS to the Yamaha 15" SDS. Conditions today: Light chop, full tank, 2 onboard. Cruise which improved 4200 RPM @28 MPH, 3.4 MPG WOT which went...

When its not tuna season, Halibut and Yellowtail are usually plentiful. :) Here are two of the better grade California Halibut we got last year.

Pretty much but right now mostly just halibut and rockfish. We had an epic summer with the El Nino, Marlin l,tuna and wahoo just a few miles outside the harbor. 8-)