Recent content by Tunacious D

HPDI's x3. Repowered last year and after my initial struggles with wanting four strokes, the only ones available at the time that would fit the bracket and did not weight too much were the Suzukis. They are excellent motors, but the dealer/service network her in C FL isn't the best. I...

Having been through the used motor market myself a year ago, I never could find a decent reference for prices on used engines. Condition is going to play the deciding factor on how much you are willing to pay. You need to have them checked out by a Yamaha Mechanic including compression...

Capt. B - do you have the model #s of the Attwood SS Scuppers that you used? Do you have two side by side; total of four on your Sailfish?

Lots of talk recently regarding thru hulls, replacement and such. I inspected my plastic ones this weekend and they are getting to the point they need done. I had a post bookmarked from one of the 90's sailfish owners on this board that was the step by step guide, and I believe also had the...

That web site is part of the Boats.net which is actually Central Florida Yamaha (Lake Placid, FL). They repowered my Grady earlier this year. Got a great deal on the motors, rigging, etc. Top rate bunch and great prices. They pay the sales tax for FL residents too for the internet orders.

After the first tanks of Yamalube, I switched to Amsoil HP injector oil. I don't really think there is much of a difference but I get a slightly better deal going with the Amsoil. No experience running Pennzoil. Speaking for newer HPDI's, the owners manual says there is no adjustment, nor...

My HPDIs have been flawless on the troll but so were the old 200 carbed Yamis I had before these. You didn't say what type of oil you use. A full synthetic may also help.

Sorry to hear it guys. Lived in Ohio for 23 years and remember having to pull the boat, winterize, shrinkwrap, etc. I waxed and buffed out the Sailfish this past weekend, replaced the fuel filters and mounted new cabin rodholders. Next week we head to Islamorada for a whole week of fishing...

Captn Bill. Had to replace the spreader switch in mine last year. There was a small set screw in the depression on the ring of the lense/frame towards the bow. Taking that out allowed the lense to be removed. Yours maybe different but I didn't initially see the screw until I got my head all...

e10 does not have the same energy content as straight gasoline. It has been said that mileage is roughly 10% less than straight gasoline.

The model 9000 I have gives you instanteous gph by engine, total gallons for the trip or total burned since last reset, and mpg or nmpg depending on how you have the GPS setup. I decided to stay with the FLOSCAN even though the new motors came with Yamaha's FMS. As long as you spend some time...

Our 93 Sailfish with carbed 200 yamahas would have delivered about that same number on a windy day, at that speed, and with enclosure up (lots of resistance). A couple of things to consider: How confident are you that your floscan is/was calibrated? Does it interface with the GPS to give...

Like Grog said. Also, you will need to replace the oil tanks below deck as the design changed for the HPDIs. Just went through this repower myself (93 200 Yammies to 2008 200 HPDIs). Our controls were ok, but decided to go ahead and replace all the controls, gauges, cables and battery cables...

I think your right 93 for sure...maybe even a 92 90/91 they changed the interior for sure the 92/93 sportbridge models with the bracket are fantastic fishing platforms.... AMEN!

I thought it is our "Patriotic Duty" to pay (more) taxes...........