Search results

2 mic. would be OK IF you use it as a 3rd or 4th stage. If you use a 2 micron as a primary or secondary, it will clog. Work your way down to a 2 micron.

should not have any problems w/ 10 mic. It is what is reccomended up in the NE b/c of ethanol. Bring extras.

Awesome! Glad it worked for you. It's like doing repairs, start cheap and work up to the expensive stuff!

Tabs up and trimmed up? You should be hitting 40 mph easily all day long.

yeah, a fresh water washdown would be pretty redundant on a lake! Raw water is on port side and fresh is on starboard. If you're not filling an aux. tank, it's raw. Sounds like you were patient, thorough & got a gem. Let's see some pics!

seafarer Welcome! I have a '92 Seafarer w/ 250 SWS II. My fuel tank is 92 gal. I would be very surprised if your boat had an aux tank. Do you have a fresh water washdown? Pop off the aft-most inspection port. That's where my 12? gallon fresh water tank is. Main fuel tank is amidship. Aux. tank...

look at "conshykid" post under Tips & Mods.. He's fixing up an '89 w/ similar issues (bulkhead replacement). You may be able to get an honest opinion of what you're looking at work & $$ wise.

Michigan Brian hit nail on the head. The end of a screwdriver is a surveyers best friend.

I am a true Startron believer (in my Pathfinder, too). It doesn't just separate the water, it breaks it down. What I like best about it is that you can't overdose the fuel. Suggested ration but overdosing is not harmful. Read the labels on some of the others "DO NOT OVERTREAT". I find I am going...

SLIDER I had the same problem w/ my seafarer. I got some starboard and 1/4"-20 toggles and fabricated my own mounting plate.

GOOD LUCK AND SAFE BOATING. AWESOME BOAT, GREAT ENGINES. STRAP ON SOME TURBOS AND GET OVER 400 HP OUT OF THOSE BABIES!

slider They are universal. I highly recommend the Garalick over the Todd. Garalick has better quality, fit and finish. They are more expensive but you get what you pay for.

trim Your pins are set too low on the engine mount. When trimmed all the way down, from the look of the 1st side pic., your engines go down too far.

I noticed the deadrise runs the length of the bracket but on my original Grady bracket, it does not. Does anyone know why or how it effects performance?

old fire hose or lash some fenders on the piling.

FIXER Believe me, I would love nothing more than to see you get that puppy splashed! But I believe you're looking at a Pandora's Box. Michigan Brian makes the point. From the way you describe the boat, it needs more then a little TLC. I wouldn't go w/ the "if it floats, why mess w/ it"? b/c it...

boat take it off the trailer, wax & buff. It will make an impressive flower bed. You'll be tacking a couple zero's on to the end of your budget.

engine Does the 2000 HPDI have the chip in it? If it does, Yamaha will be able to tell you history every minute that engine ran. Can't give an honest opinion of the hull. Put it this way, it's worth whatever you're willing to pay for it. GET IT SURVEYED.

I found something as simple as an antenna plugged in GREATLY improved the reception. Nothing elaborate- a telescoping one from BW or West literally dangling in the cuddy works. You'll be surprised! W/o the antenna, my scan would pick up maybe 1 station, sometimes just going over and over w/o...

STEREO I agree w/ BobP. You have a bad ground. As far as FM reception, I found something as simple as an antenna plugged in GREATLY improved the reception. Nothing elaborate- a telescoping one from BW or West literally dangling in the cuddy works. You'll be surprised!