Search results

2 Simrad 9s

Here are 2 evo 3’s 9‘s side by side on a custom box I designed.

No luck here either with the 9 x 14. I would also like a pair for my 228.

Enjoy!! I would have joined you if my boat was ready. I will be installing my transducer tomorrow looking at the photos you sent me . Thanks Lucky

Pighunter where did you buy the bracket that looks great? I have the same setup and I’m thinking of doing the same.

I used a gallon of Oil Eater Degreaser and dove into the bilge with a brush in hand. I also took out both batteries, the oil tank and cleaned both sides.

*Electronics box attached with L brackets using existing hinge holes. *before and after bilge pics *self bailing hoses replaced Next I will be working on the 225 ox66 replacing the trim and tilt motor , spark plugs, filters and thermostats. Getting close to water testing it..

Atlantic Blue I used half inch starboard ($80) The rest I cut it and designed it myself. Here area few other photos. It will be attached to the boat with L brackets using the hinge holes that are already there. Hope this helps

Very nice I like the way those Garmin’s look. Here is another option 2 Simrad 9s Evo 3, vhf and radio all in one.

Thanks everyone today I made progress almost finished all the electrical new bilge pumps, wash down pump, livewell pump( replaced the original one from 1999 a pain to remove heat gun is your friend) Bdsp the stripe I removed it with the heat gun. I tried the drill with the rubber wheel but the...

I purchased a 228 with a Yamaha 225 ox 66 on the east coast in June and I’m busy redoing things. 1. Buffing in and out some wet sanding ( lots of patience) 2. Replacing all hoses( heat gun is your best friend) 3. Checking all electrical. 4. New electronics flush mount I designed. No holes cut (...

Lucky that’s a beautiful boat thanks for the write up especially on the electronics package. My Grady 228 should be here next week it’s coming from South Carolina. I’m in on the get together. Thanks for setting this up.. Joe thanks for reaching out..