Search results

dont be shy with 5200

so, not to sound like a jerk, but you are talking about a windshield for a nearly 20 year old boat. it may not be fair to write off a company because you cant find one part for an old boat. grady does do a good job with alot of things (general specs, vendor contacts, fuel tank drawings...)...

dont have them do the canvas holes. do that after yourself after you install it. have you tried these guys? https://www.gpboatwindshields.com/optin1616117841693

im still surprised with all the growth in the marine electronics industry that there isnt something like this already made by garmin or raymarine.

how do you plan to install them into the boat?

understood. you could cut the old ones off with an angle gringer (wear a mask if cutting galvanized) and then get bolt on bunks. id probably only go this route if you got a really good deal. like said above, adjustable bunks are far more common than fixed.

reconfiguring the bunks isnt a difficult job. have you considered diy?

if that is full matching (style, color, feel), id definitely go with that. its a very good price

same

boats are usually supposed to be titled and registered (often the same) in the state of PRIMARY USE

i recommend doing smaller multiple strips so water collecting at the edge of the strip wouldnt have to travel the length of the tank to drip around the strip. also, it allows airflow around the middle of the tank in both directions rather than just length wise edit - i realize this may be...

following up on this. Skunk was right. it was an over flowing VST. i ended up getting both VSTs rebuilt over the summer.

update - no issues over last season. ran through almost 400 gallons of fuel and had a couple of rough rides.

i did a semi-decent write up of my process https://www.greatgrady.com/threads/another-fuel-tank-thread.37350/

id check out something like boatoutfitters.com and see what you can find there

x2 for someone that wants to be proactive and do it at a time of your choosing. i did the tank on my boat due to a leak. the tank was removed my my local boat yard (they did the pressure test, it failed, they did a visual inspection). i had a outfit in Jersey build the tank, and i did the...

also, are you 100% sure its a tab and not a transducer?

calculated theoretical speed based soley on rpm, gearing, and prop pitch

it looks like it could be brand new. i hope that dropping my bow rail will finalize the effect (well, that and new bottom paint).

is the rigging to the motors long enough? seems like they should have a bit more slack in them