Search results

Here's the boat trader add. Dropped the asking price to $82.5k. This would be a great boat for a re power. Mid $130s with new 300's. Thanks for looking. https://www.boattrader.com/boat/2002-grady-white-express-330-9747539/

We have decided it's time to sell our 2002 330 Express. Yamaha F225 4 strokes with 890 hours on the 2002 starboard and 1350 on the 2003 port motor. The hull and topsides have been recently wet sanded buffed and polished. All systems on the boat function. The boat is located in Merritt Island...

I have been using a REDODO 12v 100 ah on my other boat (2011 Hurricane) running a 55 lb minn kota terrova for 3 years with no issues in the central Florida heat.

I have a 2002 330 my wiring runs thru the tube to the right of the electronics hatch inside the windshield and the rear port side support leg. There's a wiring harness connector for the hard top fuse panel below that tube.

Prior to our 2002 330 GW we owned a 1999 2460 Denali. I would have move up to a Pursuit 3370 but the non removable fuel tank and cabin layout scared me off. After having rehabilitated both boats the Pursuit used beter materials and methods. Some observations scupper hoses never rotted out on the...

Not so bad in Orlando. Hope you don't get to much rain.

The flush pump and discharge pumps are in the cave mid cabin on the starboard side. it could also be the pump bellows. Not to bad of a job. i changed out both bellows and the duck bill valves.

Could have been done to seal that deck hatch. Chances are its soft (not a difficult job to re core) or to make the non skid work. I took on a similar 2002 project boat minus the 300's. Look closely at the scupper hoses. Check with your insurer i don't think that year was rated for 600 hp. I...

Fortunately i knew it was dead when I bought the boat. Sadly it only had 5 hours on it. Got $28 in scrap weight for it. No hope of rehabbing it.

I pulled my rusty beast out whole after draining fluids. I turned it on its side and made crossing stack of boards below it by rocking the genny left to right. i put a piece of plywood between the generator and the forward hatch bulkhead. hooked up a come along to the t top and rachetted it out...

I replace all my interior light bulbs with a led version with the same pin config and they work well.

yes, there is a drain gutter on the sides that is piped down into the bilge. I'm also after better access to the seacocks in the event of failure and opening and closing them. A larger hatch may be the better play where the pry out is now. thanks for the input.

I want to convert my rear cockpit access door to the newer style 330 express. Has anyone done this mod? Any good pictures of a newer 330 express with the hinged version. I need to recore it any way. I pulled the dead generator and don't intend to replace it and want better access to the storage...

Wow. Sorry you had a bad experience. I sold my old Pursuit 2460 and trailer to a guy in Vancouver (I'm in Orlando Fl) sight unseen with a survey. He arranged shipment on his new to him 1996 trailer. The shipper showed up with a bill of lading that he and i signed and i retained a copy. The...

2002 330 but the what they will quote in Florida may be different.

Progressive won't insure the older boats like mine. So i use Boat/US-GEICO.

On my 2002 they run to a connector on the starboard cockpit behind the bolster cushion. The 10 ga red and black run to the battery compartment. I think directly to one of the batteries. They may be dead because of a corroded connector behind that bolster. Mine were, the anchor light on the hard...

True!

Thanks for the responses. it is for the anchor hatch on the bow and one for the fish box in the stern. I have some left over Starboard i'll use to make a replacement.

Has anyone sourced a replacement hatch twist latch?