Search results

Here you go! http://www.ebay.com/itm/Grady-White-Rod ... 510wt_1112

Good to hear! I have a 205 Tournament and I am going to do the same! Make a cover that uses the windshield back to the transom, then a bow cover made for the front! Thanks again for the confirmation that this works well! :goodjob Byron

fishie, you were right on, talked to G.W. and not only did they suggest the toggle bolts, they are shipping me some. :dance

Yea, thought about the toggle bolts, but that would require 5 - 1/2" holes. Not sure if I want to do that know or later if/when the screws or bolts didn't hold up!

Great Info, Thanks!

Thanks seasick, good thought I do have a compass! Looks like it will go aft on the starboard side. How about a VHF antenna? Whats a good location for those on a dual console? :hmm

Whats the best way to mount a pedestal on the floor of my 205. I removed the port sleeper, which had 6 factory installed #8 SS sheet metal screws holding it in place. Those are all epoxy filled and gel coated. We have a matching deluxe I seat we are installing. There is NO access under the port...

:goodjob Thanks

Looking to mount my Humminbird GPS puck, where would a good place be on a 205? thanks

Thank you, that's how I will plumb it!

There is two ports on the Yamaha filter housing?

1- BCLII 2- Byron 3- 2009 Tournament 205 4- 2009 Yamaha's F-250 & T-8

How do you plumb a fuel line from the tank to the auxiliary motor (Yamaha T-8 remote) with only one fuel pick-up from the tank on my GW 205. Other boats I had owned in the past had two pick-ups on the fuel tank. I heard if you just tee the main line to the kicker, that may siphon gas back out...

Yep, sure enough, removed them this weekend and got then all cleaned up and treated with a 3M product. Now, I'm going to add 2-speakers in the bow and have the bolster in the front redone to go around the speakers. :D thanks again, a wealth of information on this site!!

What kind of temperature does one need to work with gel-coat? My Spectrum patch paste repair does not say anything about temp. Still cold here in MN, but hoping to repair some small holes in the floor from the port/sleeper removal and transom area after I switch the boarding ladder from the port...

Thank you, I will give that a try this weekend. Yours look like new ones, very nice job!

How do the bolsters remove? I have a 2009 GW 205 and would like to remove the cockpit & bow and clean them as well as behind them (gel-coat) :hmm .

I just got a 2009 GW 205. I plan on pulling it with my 2006 Toyota Tocoma crew cab.

Thanks guys on the trailer comments, talked to marine surveyor Bob Dolce this week. He said he will send me my survey report next week. Looking forward to receiving that, before heading down to SC for our sea trail. we have never road in a GW, just sat in a couple of them and really liked what...

Buying the trailer from them, same trailer another dealer that also had a 205, was going to put under it. Its a Wesco AL-2150T Ultra Series with a 5000 lb caring capacity. GW customer service told me through emails, boat has a max. weight allowed at 4200 lbs. therefore, Because of variances in...