Search results

I could blow one way through the tube and never tried to blow the other way..... My dumb arse fault.

Clog in fuel PU tube..Haunted me for 2 years ,,,easy fix.Clean the screen.Hope it works for you!!!! I was ready to sink my boat. All better now.

Thanks for the come back. Tanks are in and decks are getting screwed this tonight.

Got a PM about the inter deck. Re considering using this product ???? Any one else have any insight on this product?? Thanks. :(

I decided on the Interdeck,I picked up 2 quarts.I hope that is enough.Of course we had 3 days of rain,so I`m off to epoxy the tanks today and hopefully get them in and the decks down by next week. Finest Kind thanks for the pic`s, I have a 89 trophy pro.

Replacing the fuel tanks and while I have her apart was looking at the deck panels which much of the non skid is worn away. I saw the sticky about replicating the diamond pattern, to big of a job for me. Any one have any advice on refurbishing an old deck? Thank You.

Thank You for the pic`s very nice .

Picking up materiel tomorrow, These deck covers have almost all of the diamond pattern worn off them in some areas. I read the sticky on the gel coat fix...Very interesting and use full. But not on my list this season. Was thinking of painting the entire deck. Any one have any advice on...

Just dug out all the 1\2 wood peices on both my tank covers.....25 TrophyPro. I thought there was going to be 3\4 in there due to the weight of the panels. Nope, just plenty of wet wood. Slam down hatch covers looked good? How did they get so wet? Going to replace with 1\2 ply. About how...

I`m gonna go PU the boat and give this a shot my self. It will probably be another month before he will get a chance to look at it being this time of year. I`ll post my results. Thank You for your help.

I am replacing the main 200 gallon with a 125. The new tank is going to be 3 inches shorter in height. Length and with will remain the same. Shimming will diffidently be in the future.

RR, motor would die at idle when I got the clunk, In gear at low rpm`s she would just clunk away. Just in time, can i measure the cable in any way? Ball park price on a replacement ? Thanks.

Fuel water separator is clean, new fuel as well.Tank was pumped dry. I`m thinking clutch dog ? But 2 lower units doing the same thing???

Winterized the motor,de-carbed, changed bottom end fluid. Put the motor in for a test run.....got a slamming noise that you could feel through the boat at 2000 rpms??????? At 3000 to 5000 she ran great! At idle she started slamming and dieing out? returned 2 days later in the rain :x and...

Cutting an access hole was the single greatest piece of advice I have ever got! ALL LINES ARE OUT!!!! Tied strings for install.... My arms look like they have been through a wood chipper... But I NEVER WOULD HAVE GOTTEN THEM OUT IN 14 DAY`S with out the heads up! THAAAAANKKKKK YOOOOOOOOOO...

Man ! looks like I came to the right place. I replaced the bulk heads to the cabin with 3\4 star board yesterday. Lots O fun ! Would I be better off removing the filler necks on the gunnel to replace the fuel fill hoses or just bite the bullet and cut an access hole? Sorry ...I just checked...

I think I`m going to get the dremil out and make another access hatch to get to the starboard fill ports. Are you fairmilure with my model?? If so ,why is there 50 pounds of lead shot in my forward bilge? Why is there a plug in the PVC that leads to my rear bildge?? I want all the water on...

Tried it with my bottom paint........16 oz of cyayanne pepper..More growth then ever.

Nice ride!

Hi all, new to site and in the process of replacing the tanks and lines on a 25 trophy pro. I am asking my self, do they install everything on these boats and then bolt,glue and screw these thing together? Pulled up the 2 floor panels and found all kinds of good stuff. A hole in one of the...