Search results

If you do as we did just make sure you do not use the centre of thru Hull hole for centre of transducer as you might end up on rounded part of keel below. Just something to check.

Managed to easily find some photos. We also added a bow thruster which I know is rare on a Sailfish. We have since moved back to a Marlin 300 which we had before the Sailfish.

We had a B175M installed in our last Sailfish 282. From memory we moved one of the thru-hulls for either livewell or washdown and installed transducer in that location. We also had the Garmin Side-View / Down-View transducers on each transducer flat.

Thanks for the replies. I have decided to mount above the water tank in the bilge. The pump will be sealed with lanolin and in a sealed box.

Hi All, 2006 Marlin 300 which is having a refit of engines and electronics in the next two weeks. Boat does not have autopilot currently but we will be installing a Garmin Reactor 40 with Smartpump. Could someome advise what the factory location for the AP pump is? There is no generator so I am...

Hey guys, Thanks for the responses. The boat is moored in the water in a Seapen (this negates the need to anti foul the hull). There is moderate current and moderate windage at all times and turning is quite tight. This will be the fourth boat in the last ten years with twin outboards and I...

Hi All, I am located in Australia and am about to take ownership of a Sailfish. I have previously owned a 2007 Marlin 300 that had a Sidepower SE40 bow thruster installed. Can anyone tell me if it is possible to install a bow thruster in this model Sailfish? I am assuming the local boats...