282 Sailfish Thru-Hull Transducer Help

vinpaa

Active Member
Joined
Sep 20, 2018
Messages
32
Reaction score
3
Points
8
Age
34
Location
Babylon NY
Model
Sailfish
I decided to upgrade the electronics on my 2006 282 Sailfish this spring. I went with the Simrad NSS Evo3 12" MFD, 4G Radar, and Airmar B175H 1kw Transducer (3-3/4"dia drilled hole). I am having a real hard time finding a location I'm 100% confident in for the transducer. The bilge has a nice gap between the original transducer flat and the stringer, but it looks like it may be a hard squeeze tightening the transducer nut. The original transducer pockets are too small for the 1kw unit I bought. Any pics or advice is appreciated. Thanks!
 

Attachments

  • IMG_4481.jpg
    IMG_4481.jpg
    1.4 MB · Views: 22

vinpaa

Active Member
Joined
Sep 20, 2018
Messages
32
Reaction score
3
Points
8
Age
34
Location
Babylon NY
Model
Sailfish
Have yet to commit to the install. I have a pro coming out this week to discuss. Last 28' Grady he did required the deck plate to be removed and reinstalled to allow solid hull access. Anyone have experience with this? I also am adding some photos of the bilge and hull for future references. IMG_4681.JPEGIMG_4684.JPEGIMG_4685.JPEGIMG_4686.JPEGIMG_4687.JPEGIMG_4681.JPEGIMG_4684.JPEGIMG_4685.JPEGIMG_4686.JPEGIMG_4687.JPEG
 

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,137
Reaction score
1,435
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
I don't have those notches in my 265 so I'm a little at a loss. I'm assuming they correlate to a flat spot outside of the stringer. You can mount a 0 degree thru hull there, yes?

Is your transducer 0 tilt or 12 degree or 20 degree?

Hopefully some 282 guys chime in with what they have in place.
 

Jdurb

Member
Joined
Apr 15, 2019
Messages
20
Reaction score
6
Points
3
Age
50
Model
Sailfish
I'm watching this closely! I have a 99 272 which looks identicks in the bilge. My b175hw is supposed to come in tomorrow and I've been racking my brain on where to mount it. I ordered the 20 degree tilted element which was advised by Jacobson marine. I'm thinking it's going to go right below the flat spot. I just don't think there is enough room forward of it due to the bulkhead.
 

Motivator

Well-Known Member
Joined
Feb 28, 2005
Messages
169
Reaction score
6
Points
18
I have a B164 mounted in my 282. It is a 20 degree and located between the stringers on the port side. If I remember correctly, it is about in line with the aft portion of the battery tray if you were to draw a line from port to starboard.
 

Jdurb

Member
Joined
Apr 15, 2019
Messages
20
Reaction score
6
Points
3
Age
50
Model
Sailfish
I have a B164 mounted in my 282. It is a 20 degree and located between the stringers on the port side. If I remember correctly, it is about in line with the aft portion of the battery tray if you were to draw a line from port to starboard.
Thanks for the response. Do you notice any interference from the water pick ups in front of it?
THanks
 

Motivator

Well-Known Member
Joined
Feb 28, 2005
Messages
169
Reaction score
6
Points
18
It is outboard of the pickups, location favors the outer stringer. In clean water, I have no issues; however, following in the wake of another boat I occasionally lose bottom.
 

Jdurb

Member
Joined
Apr 15, 2019
Messages
20
Reaction score
6
Points
3
Age
50
Model
Sailfish
Awesome thanks. Not sure if it's possible but a picture would be great. I'm just wanting to measure twice and cut once!
 

vinpaa

Active Member
Joined
Sep 20, 2018
Messages
32
Reaction score
3
Points
8
Age
34
Location
Babylon NY
Model
Sailfish
I'm still waiting to meet up with an installer. Does anyone have pictures of a 282 sailfish with the deck removed, exposing the gas tank and inner hull?
 

vinpaa

Active Member
Joined
Sep 20, 2018
Messages
32
Reaction score
3
Points
8
Age
34
Location
Babylon NY
Model
Sailfish
Does anyone know the exact transducer the box out was designed for?
 

Motivator

Well-Known Member
Joined
Feb 28, 2005
Messages
169
Reaction score
6
Points
18
I believe it provides a flat surface for a fairing block mounted transducer to be mounted.
 

vinpaa

Active Member
Joined
Sep 20, 2018
Messages
32
Reaction score
3
Points
8
Age
34
Location
Babylon NY
Model
Sailfish
I’m still struggling here. Anyone know if you can mount the thru Hull transducer behind the molded pocket? Will this cause turbulence and mess with the reading?
 

SkunkBoat

Well-Known Member
Joined
Oct 12, 2017
Messages
4,137
Reaction score
1,435
Points
113
Location
Manasquan Inlet NJ
Website
www.youtube.com
Model
Express 265
you ever notice nuthin is easy? and they put that notch there to make it easy!

Wish I could give you a definitive answer but you seem to think it might be a problem and I will agree it might be a problem.
 

Fido

Well-Known Member
Joined
Dec 1, 2013
Messages
45
Reaction score
10
Points
8
We had a B175M installed in our last Sailfish 282. From memory we moved one of the thru-hulls for either livewell or washdown and installed transducer in that location.

We also had the Garmin Side-View / Down-View transducers on each transducer flat.
 

Fido

Well-Known Member
Joined
Dec 1, 2013
Messages
45
Reaction score
10
Points
8
Managed to easily find some photos.
We also added a bow thruster which I know is rare on a Sailfish. We have since moved back to a Marlin 300 which we had before the Sailfish.
 

Attachments

  • F281F65B-588E-4AA6-A33E-2752DBB7840C.jpeg
    F281F65B-588E-4AA6-A33E-2752DBB7840C.jpeg
    1.9 MB · Views: 70
  • 62D153FD-14F0-4C27-AC08-B874DA702513.jpeg
    62D153FD-14F0-4C27-AC08-B874DA702513.jpeg
    2.1 MB · Views: 71
  • 01187FCE-7BBB-4838-8CB7-6BC41D6AF595.jpeg
    01187FCE-7BBB-4838-8CB7-6BC41D6AF595.jpeg
    2 MB · Views: 71
  • Like
Reactions: vinpaa

vinpaa

Active Member
Joined
Sep 20, 2018
Messages
32
Reaction score
3
Points
8
Age
34
Location
Babylon NY
Model
Sailfish
Managed to easily find some photos.
We also added a bow thruster which I know is rare on a Sailfish. We have since moved back to a Marlin 300 which we had before the Sailfish.
Thanks for the photos. Very helpful!
 

Fido

Well-Known Member
Joined
Dec 1, 2013
Messages
45
Reaction score
10
Points
8
If you do as we did just make sure you do not use the centre of thru Hull hole for centre of transducer as you might end up on rounded part of keel below. Just something to check.
 

Jdurb

Member
Joined
Apr 15, 2019
Messages
20
Reaction score
6
Points
3
Age
50
Model
Sailfish
Finally got mine finished and seatrialed. I put it right where you were thinking between the flat spot and the stringer. It fits and works flawlessly.
 

Attachments

  • 20190420_185108.jpg
    20190420_185108.jpg
    803.8 KB · Views: 57
  • Like
Reactions: vinpaa