Search results

Or you can do what we did and replace the posts with 12 inch. It works great for us on the Marlin as we wanted to be higher up for better visibility. See the posts and pictures by Ifish.

i have 24' Pro series Lee's side mounted on my Marlin and love them.

Gotagrip II 2007 Marlin, twin F250's

I have a similar setup for my 07 Marlin. What I had done was put an aluminum runner under the aft part of the hard top which the sun cover slides into and goes back to two 6 foot aluminum poles in the aft rod holders. I could give you the measurements of the sunbrella cover if that would help...

Thanks for all the info Andrew. Enjoyed the pictures and thanks for the chat. Al

I have an 07 Marlin. Anybody add extra gunnel rod holders to their Marlin? I want to add two, one on each port and starboard between the two factory ones. Any tricks I should know about I would appreciate the recommendations.

I do not have an answer, but mine is in bad shape also. Perhaps we should ask Grady service for advise.......just thinking out loud.......

Not sure where you are located but the last time I had 100 hour service on my engines it cost me $580. Granted two engines but 100 hour service is a no brainer and can be done easily. I agree with Trapper, more fun to learn about your engines. Only service I pay for these days is the 1000...

I have a 2007 Marlin. My A/C is made by Mermaid Manufacturing. Mermaid Marine Air Conditioning: Model M-9CHP-T 9000 BTU Cool/reverse Cycle Heat Top Discharge. Made in Fort Myers Florida; phone 239-418-0535 Good luck.

I have a 2007 Marlin with twin Yamaha F250s. Best long range cruise is 30mph at 4100 RPM. I burn about 21 gallons per hour at that cruise speed. Not sure what the older models burn. Before I bought the Marlin I had a "97 27 Sailfish with twin 200 2 strokes. Fuel burn was the same as the...

I had mine on a 14,000 lb boat lift. I tried the 10K as my Sailfish was fine on it but the 10K lift was pretty shaky with the Marlin on it. I would not recommend a 10K lift with the Marlin based on my experiences.

My boat was on a rack at my marina when the guys came down to fix the headliner for me.

I would throw them away and get new, cat piss will stink forever.

I would start by cleaning and checking all your battery connections and in particular the ground connections. It may be just that simple. Also if you have a volt meter check to see if you are getting 12 volts to the starter. Good luck.

The guys Grady White recommended came down to Port Canaveral and fixed the two cracks in my headliner. The guys names are Troy Woolard and David Nelson. Phone 252-946-9979 email: wnboatrepair@embarqmail.com They did a fantastic job, just like new. Very nice guys too. They started about 8 AM...

Okay guys, this is my last fishing report from the gulf, as I am shipping my boat to Blue Points Marina at Port Canaveral. We are moving South to be close to our Son, grandkids, and our brothers. So......1st report: 25 March, before the reef donkey's were closed on 31 March; we went out about...

I have 24 foot Lee's on my Marlin. They are perfect for my boat.

You were right Grady White customer service is awesome. They are scheduling the repair team to fix the crack in my headliner. Great tip and always great service from Grady White.

I was the boat with Zip Wax. Cleans well and does not take the wax job off. Buy it at Wal-Mart, cheap.

Well today when I was in the cabin of my 07 Marlin doing some prep for the weekend and I noted a significant crack in my plastic headliner. I did the drilling of both ends to stop further cracking now I am searching for the best fix. Anyone know if there is some kind of a repair kit available...