Search results

I agree that it is a no brainer on that tank.....don't want gas and fumes exiting nor water entering the tank. Can wait to see what the bottom of the tank looks like before pulling the aux. Could empty it completely and run off the aux until next winter. You have some options on how much...

The power and stuff goes up the rear hardtop support leg. I added a spotlight and it's cable filled that tube (or atleast the opening). Don't want to add another hole to the tube plus may damage the existing wires in it. Could do the wire tie method but hoping for something a little cleaner.

I want to connect some electronics in the upper and lower boxes but I don’t have a tube connecting the two. I figure I have 2 options but am open to other ideas. Option 1. Have an aluminum pipe fabricated to connect the two. Disadvantage This just adds a new blind spot. Option 2. I could...

What is the issue/concern with some water on the deck?

Go to Grady's website. All manuals are online.

I used the Bathroom caulk and it yellowed in the sun in the first year. Last winter I used the window and door on the other hatch and it seems to be holding up better.

Anyone in the North / South river use A to Z Boatworks for your Yamaha repairs? What are your opinions of the them?

How do you measure the water pressure?

It does have that hose from the poppet valve. I did not notice anything wrong with it while working on the poppet valve but will check it out. But my understanding of the pressure relief valve is that at low rpm's there should not be any water flowing thru that hose.

On the old format it marked all topics as read when you left the forum so the next time in you could tell what had been updated since the last visit. Now I have to manually click the "mark all read" link before I leave the forum. I too liked the old look better but I'm sure in time I will...

Did pull the water jacket. No real salt build up. I do flush everytime. Did find an anode that we assumed was causing the issue but it did not fix it.

The new lower unit came complete with a new water pump. Timing has not been touched. If it was timing would that only affect one side? Same question applies to the earlier post of a missing o-ring...would just starboard side be affected?

Poppet valve has been checked ..double checked and replaced. All new spring, grommet, new style valve, cover and even new bolts.

1995 225 txrt I overheat while trolling at 6-700 rpm's. Runs ok at 1200 rpm's and above. Not sure about in between. Has not run right this season. (Did have a late start) No problems last year. Since last season: New lower unit New thermostats 2 new poppet valves (last one installed is the...

I believe Bob is referring to Scott at Vector LED http://www.vectorled.com/index.htm

Can have them load tested to see if they need replacing.

Transom repair may be in my future. I haven't decided if it is something I should try myself or pay. I'm looking for recommendations on books and/or video on fiberglass boat repairs. I've gain a bunch of knowledge from this site but would like some more detail before getting into a...

Check out SEI http://www.sterndrive.cc/mm5/merchant.mvc just ordered one for my yamaha

Do you have time to drop anchor?

Check for 12 volts at the horn (with the switch pressed). Hook the horn up directly to a battery and see if it works there.