Search results

How is the rub rail attached? The reason being is when I bought my boat the rub rail on the starboard side is pushed down about a 1/2'', in like a 8'' section,like it got stuck under a dock. Can it be pushed up with a 2x6 off a floor jack? Heat it with a heat gun and hit it with a dead-blow...

BobP, no I have not looked at the inline 4's I will give them a look. Thanks for the tip. Joe.

I would stay with 2 motors. Don't go down in horsepower, you will end up being unhappy. If I were to re-power, I would look at 175hp. E-tecs for my boat, it's rated for 350hp. and the E-tecs are lighter than my 150 Yamahas, any 4 stroke motors would sink my transom lower than it already is! Joe.

Your Jeep might tow it but not very safely. You are looking at over 6000lbs. A good 3/4 ton truck is more in order. You have to think about stopping that rig at highway speeds more than pulling away from a stop. Also stiff cross-winds can be dangerous. I pull mine with a diesel Excursion without...

I really wouldn't mind one about 36 feet long !! Joe.

Look at a Fastload trailer they are out of Fl. I bought one for my Gulfstream, aluminum, stainless bolts, Disc brakes, bunks. It was like $4650. They delivered it to Il. for $300. Up grade the tires tho if you are towing alot. Joe.

Go with the '94 for the already stated reasons, 2 motors, sea V 2 hull you will be glad you did! Joe.

Your boat is rated for 350 hp. I would look into a pair of 175hp E-Tecs. As 4 strokes are too heavy. If I repower, thats the way I would go. Joe.

A skeg guard is a easy fix, both mine were in sad shape when I bought my boat so I covered them. Looks fine. Joe.

My wife and I re-named our Grady, found the proper procedures online followed the un-naming and the re-naming instructions toasting to the 4 winds, I felt a little silly sitting in our slip tossing glasses of champagne out in the water, but I was not going to take any chances, plus you get to...

Did I read somewhere that hanging a fabric softener sheet in the cabin will keep spiders out? Or am I nuts? Joe.

Ok, so I just bought a new Icom M504. The instructions tell me to keep it 3 feet away from my compass. Well, my electronics box is a lot closer than that, and that's where the old radio is at. Is this something I should worry about? What do you guys think? I guess I could move it to the box...

I don't have any part #'s for you but a NAPA store is your best bet. Joe.

I replaced mine 2 years ago, from a Grady dealer. Cost a whole 8 bucks, now the seat sliders are like new! Joe.

Thanks jaydub, that's a good deal on a product that really works good! I stocked up too Joe.

I had a Grady dealer in Two Rivers Wisconsin send me a pair of those, like 8 bucks a set fixed me right up. That rockin' will drive you nuts. Joe

Yes, right rear leg was set up as a rigging tube, used a pull string and wire lube. Joe.

Base price quote was something like $4650, I added 10 rocket launchers, total ended up around $5680 plus shipping. The only thing thing that soured the whole deal was waiting like 10 months. But I think there was some confusion because of the extra width of the Gulfstream. But all in all the...

Redman Marine should be at the Boston show. They are out of Maine, I had them build me a top for my Gulfstream last year. Beautiful job,shipped to me in Illinois, installed my self, fit perfect! It just took longer to get than I liked but it was worth the wait. He has a picture of my top on his...

I really don't think so, but get some measurements. Tape measures don't lie. Joe