Search results

Google boat tank vent fittings Get stainless steel or chrome over brass Do not buy ZAMAC or chrome/zinc. Stainless steel may run a rust line Tha Most Grady had vented fuel fills. That is probably a waste tank vent

Your info is insufficient for a response. How many motors, switches, batteries? Model and year of boat. Look at your owners manual for the diagram. You can get a pdf of your model/year owners manual at gradywhite.com

Fuel tank probably needs replacing if original. The cost of that deterimines what else you do. ( for a 19' boat you could just replace with a generic Moeller plastic tank that fits) Deck drain hoses!!!!!! Shift/throttle cables clean out out remote oil tank, replace tiny filter on remote oil...

You don’t hear a beep every time you turn the key on? It’s done it on my Yamahas, my Suzuki’s and I’m pretty sure my old mercury. You don’t hear a beep when you stall?

On every motor I’ve ever owned yes

Another early solo trip just 5 miles out of Manasquan inlet. Limit by 830. This double was 10 and 11. I had to decide which one to throw back. Another nice bag of fillets

home depot

Mine are SP. done before I bought the boat. Atlantic Coastal Welding aka speedy tanks is in Bayville. They do good work too. Do a search. I think someone posted 265 tank swap. Maybe Southern Style??? No cutting done to deck. My KUS sending units are threaded instead of the...

Tell your wife you need a new motor..... ;)

There are other things that could be "repaired" on a helm. The shuttle valve can get stuck or blocked and there are springs and balls that stick. IMO, get a new one. You have to buy a Classic tilt that includes the tilt. You can't just buy a pump. The shaft on a tilt pump is different. Also...

still in great shape. no loose threads, no broken zippers. The hard plastic looks great and so does the soft sides. One thing I want to do is replace a couple of the front windshield snaps with Loxx pull-ups. Bought them a year ago but haven't gotten around to it

For many years I used a Hero4 attached to half a fising rod. It had the clear UW case. Only used battery, didn't try cable power underwater nor on hardtop. I got a lot of great great UW video by sticking the rod in the water. That is fish at the boat. Hookup was trying to look at the bottom in...

Went solo this morning 6am. Flat calm. Stopped at Klondike. Deadsticking doubleheaders but all small. \Ran to shark river reef. Got there 7am Limit seabass by 8 am. Back at dock 845 Friends got out of work at noon and we fluked the river for 3 nice keepers

Simple power is to get a 12v to USB outlet on amazon and wire it to near where you mount. Then you can use the gopro cable.

Got our 40 seabass limit and 25 red hake. One short cod and a short female lobster! It was blowing hard in the morning so we fished the Klondike rocks. Got half the limit. Wind died out at noon so we ran out to Shark River Reef. It was a slow pick until the last 7 fish. Bite turned on with...

The boat doesn’t matter. You need an outlet that accepts your cable to your reel. I have the same Marinco outlets. You should have the power on a switch not to battery. I powered mine from my capstan breaker switch. That way it only has power when that switch is on…almost never…. Less...

Kicked off 2025 with west wind 20 to 25 gusting 35. Anchored on Axel reef a mile and a half off the beach. Couldn’t get out any farther than that and still be fishable. We managed 11 keeper Seabass, and a couple of Ling. And I caught a 20 inch fluke in the river. The dock bass were biting...

You know that all of the holes thru the stringers are the same ?

something silly....

finally got around to replacing the fresh water system. Removed the cabin faucet and capped the hole using a standard SS hole plug for a sink basin. I don't need a faucet there. Its in the way. Removed the Head sink faucet and replaced with very cheap chromed plastic RV cold water faucet from...