Search results

  1. H

    How to repair this??

    maybe one of those grabby things short people use in the kitchen to get stuff out of the top shelf of the cupboard https://www.amazon.com/RMS-Rotating-Mobility-Extension-Wheelchair/dp/B00KCXEBZ0/ref=sr_1_3?dchild=1&keywords=cupboard+reaching+tool&qid=1587351282&sr=8-3
  2. H

    1995 Adventure 208 Thru Hull Replacement Techniques

    You may have to remove to ring the deck plate snap in to. It will give you a little more room, and yes, you have to cut some foam. Can you post a pic? My 1993 208 has an deck plate on the vertical (facing aft) in front of each fishbox, port and starboard 1/4 drive universals, long extensions are...
  3. H

    Terrific. Your kindness was much appreciated.

    Terrific. Your kindness was much appreciated.
  4. H

    Insulation

    :eek: :eek: :eek:
  5. H

    Ok All you '93-'96 Adventure owners

    What are you doing about your radio box? I guess before Grady refined it into what it looks like on new models, this is how it all started. Anyone do any modifications to make this look a little more modern and get a better watertight seal.? Not much room to work with the way the hinges are...
  6. H

    Another 208 Update

    Nice job on the Whaler!!!
  7. H

    Another 208 Update

    It's an option when you do "build your own door" on their website. I believe it sits in a routed T channel. I think you can buy it separately by the foot on their website
  8. H

    Another 208 Update

    All done !!! Looks good. Port side next :) Went with the bulb seal and the non-locking stainless lock
  9. H

    Another 208 Update

    All this down time with the corona thing has me tweaking and updating all the things I never could get done during the season, which I guess isnt such a bad thing. Im guessing many of the older 208's out there have pretty beat up tackle box doors just like mine. I had boatoutfitters make me one...
  10. H

    looking for the post/ beam for table/ bed

    No local fabricator in your area? Hard to tell from that pic, but that looks like a tube with a ratchet lock and some kind of mount on the vertical
  11. H

    All done on my end Bill - Success I will ship them back to you, either later today or tomorrow...

    All done on my end Bill - Success I will ship them back to you, either later today or tomorrow. All the Best, Sandro
  12. H

    Foam tiles in lieu of berth cushions

    This is a very good idea, now I have to raid the schools and look for some. LOL
  13. H

    1994 209 Escape Seacock live well/raw water

    If fishing is your thing, and you can obtain live bait, then heck yeah its worth. I keep bunker alive when bass fishing for hours
  14. H

    '93 Seafarer

    25 k? Hmmm, seems a little high. A few threads around here about the fuel tank replacement and also the removable deck hatch that seems to always have a core issue. Here is a link to my thread about replacing my fuel tank and having the soft deck hatch re-cored...
  15. H

    1994 209 Escape Seacock live well/raw water

    The yellow handled one is the seacock. The other plastic valve is a diverter. It diverts the water to either the livewell or washdown.
  16. H

    Boat Cover for my 208

    hey thanks for the pic - I guess I should go under the trailer with the front straps and get it a little tighter. Ironically my driveway is sloped down pretty good, but in order to get the proper pitch to the stern I have the bow up quite a bit. Cover looks a little better now than when I...
  17. H

    Boat Cover for my 208

    So here us the latest update: (My neighbors must think Im nuts tinkering with this thing everday..hahaha) Cover is good, keeping the water and debris that is now blowing around and falling from the trees out of the boat (just in time) I was doing something I never had to do on my boat in all...
  18. H

    228 windshield help needed

    Im in the sand it, prime it, paint it camp. A little time and sandpaper, tape and paint and should look like new
  19. H

    Steering Wheel Cap for Adventure 208

    I turned one from oak on my lathe and epoxied it in years ago