Search results

Let us know which boat and year, and also some pictures of the situation would help. Did you disconnect the wires to more than just that one switch? This guide may be helpful. https://newwiremarine.com/how-to/wiring-a-boat/

I had an 1/4" acrylic panel laser cut with the right openings for my electronics... Here's a thread on it: https://www.greatgrady.com/threads/custom-dash-panel-for-330-express.23367/ Also had them make a panel for the key switches and another to cover the exact spot you are showing (mounted the...

Port side has a small built-in cooler under the factory seating, so putting the chair there would have made that inaccessible. Also it makes the starboard side even more nap friendly cause you can stick your feet under the new chair.

This is the wiper arm that fit my 330 express perfectly: https://smile.amazon.com/gp/product/B000NI1EPO/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

My pump is where your furuno is (on that ledge near the genset), and my CCU is under the live well accessible by removing the tackle storage. I get an 84 quality for the compass calibration in that location.

Yeah - I had to read that at least 5 times to make sure I wasn't missing something: This is from the PDF you can download at https://kus-usa.com/wp-content/uploads/2020/02/KUS-USA_SendingUnit_Installation_v4.pdf PROPER WIRING INSTALLATION: - Connect ground (pink) wire from the KUS sending unit...

My fuel sender went bad on my 2003 330 Express AUX tank. I was originally going to have my marina replace it as I felt that I didn't want to mess with the fuel tank, but it turns out it was a very easy DIY job. A quick email to Grady let me know that my AUX sender is 26.5" while the main tank is...

Yep - remove the screw and the arm should pop off the splined motor armature. Penetrating oil should hopefully do the trick if it's stuck, but if that doesn't work you might ask your marina how they deal. I've never had to remove a stuck one, but I assume starting with heat & hammer and then...

You might want to chat with a Yamaha mechanic and find out if the engine would have thrown and recorded a code when it died like that. Assume you have original F350's? I'd probably want to run the engine diagnostics and see if it can tell you about any known problems.

I've noticed that the boat is quite sensitive to engine trim in terms of maximizing MPG -- you might try trimming out a bit. What props are you running and what is your top speed & RPM?

That's a good idea Dennis... Could just fill the live well with fresh water at the dock and use a regular AC powered sump pump (or DC if you don't have a generator) -- they have garden hose fittings already. Get a 25ft ZeroG hose and store the whole thing in the live well.

I think a fair few folks leave them open all the time -- no criticism intended, but I'm not sure they realize how many boats sink at the slip because of a failed hose clamp or leaky hose. With the seacock open the only thing keeping your boat floating is a hose and some clamps in your bilge that...

I have an '03 and I'm pretty sure there's no plastic in mine because I often get a bit of spray into the cabin when I'm washing. I'll look at it more carefully, but wondering if there was some protective film that was never removed or something like that? Or someone put some plastic in to keep...

Installed this on my 330 — very easy DIY on the starboard side because you have access from underneath from the live well. I put in an inexpensive Garelick 9” pedestal that only swivels. The seat is an mid-tier Taco Marine that’s no longer made — I have arms for it too butI bought them...

Had the same problem on my 330 -- in a fit of pique I WD40'd the heck out the area under the plastic covers to the tilt steering. Took quite a few tries, but I finally got the right spot and the squeak went away. Still not sure what was rubbing.

Wow - that part is pretty thick stainless steel -- how did you bend it?

Search the forum - others have done it. I had my marina do mine last year and I replaced the hoses too -- worth doing because if those hoses leak it can sink your boat. My marina ended up cutting two access holes on the transom and putting pie plates in. I think some others may have managed with...

I posted a thread earlier, but I opted to add 4 clamp on holders on the hard top supports alternating with the factory welded ones. I'm 5-8 and there's no way I'd be able to get rods in and out of hard top rocket launchers without climbing up on something. I know I'm not tall, but that boat...

For what it's worth, these replacement blades fit my 2003 330 Express wiper, though I am the 2nd owner so I'm not 100% certain the wiper is the original.

I love my FP which is still the original in my 2003. But, if/when it dies I will almost certainly replace it with an inverter (and hopefully lithium batteries will be pretty standard by then). However, we rarely if ever turn the air conditioning on or use the hot water heater, so my main use...