Search results

I was raised in Jersey fished head boats out of your area - which is why I’ve been in Atlanta & boat in Florida since ‘76

Big smiley faces on side panels, front panel too & rear panels rolled up made it tolerable

Thanks for the responses. After reading them and thinking it through I am leaning toward keeping the three pieces between the windshield & hardtop on all the time & opening the center smiley face on real hot days. I will have to see what it's like without the side panels as far as wind and...

I am having a new enclosure made for my 2002 330 and I have to send the old one to be used as a pattern for the new enclosure. I removed the enclosure on Friday, which was quite an experience since I don't believe it had been removed in the past 16 years. After removing the enclosure the feel...

My 2002 330 with Horizon 600 is 1/4” BBB chain and 1/2” line

Re: Any 330 owners with freefall windlass operation problems Everwhom - About 5 years ago I had a wired handheld remote added to the bow, it has about 4' of coiled wire that connects inside the anchor locker (I keep it in the helm footrest storage area when not in use) before I added this...

Re: Any 330 owners with freefall windlass operation problems Dennis - thanks for the tip on untwisting the line, I hadn't thought about doing it that way. Any suggestions on how to ensure that the swivel is actually swiveling?

I have a 2002 330 with the original Lewmar Horizion 600FF windlass. I've had the boat about seven years & it came with 3 strand twisted rode. For the first 4 years I had to continuously manually handle the rode as it would free fall or the rode would kink and jam the gypsy. About 2 years...

This is kind of what I was thinking plus I have no idea how difficult a job it is on a 330. If it's relatively easy I may try it - if not easy I will probably take my chances

Dennis That is a good reference manual - thanks

It appeared in the latest issue of BoatUS magazine and refers to replacing anodes in the water heater. I haven't read anything over the years referencing replacement (or even the existence) of these anodes. I was wondering if it is something that I have been overlooking or is it a non-issue...

The water level in the bowl is not draining out and I periodically clean the seal as I have had the draining issue in the past. I don't know where the pressure switch is located but with the manual & looking at the system I should be able to find it. I don't know where the vacuum tank is...

REEL SWEET *4 I wanted Reel Sweet as we have a chocolate factory and that's what bought the boat. My wife said the only thing "Reel Sweet" are our 4 grandkids, hence the *4

About 2 years ago I had the vacuflush system serviced with new duck bill valves, etc. Everything was fine for first year and then it seemed to develop a leak with a vacuum seal. It started out where the vacuum pump would come on maybe for two or three cycles every hour or so. Now it's...

Mine is mounted same as this

Does it occur when the genny is running or at all times - I have a gas smell coming from the exhaust from the genny - tech serviced it and said running too rich - he needed to get some additional parts to correct problem - Checked with a few sources & they said it is not a critical issue - I do...

The locking device is designed to fit into the fuel filler with a tab that locks into the fuel filler - without key no way to bypass the lock - the parts have been designed to be compatible - it's a Perko part & I believe it only works with Perko fillers Water has not been an issue & I have...

This is what I used when I had an issue with a disgruntled used boat buyer attempting to do damage to my boat. Needless to say my fuel inlets are Perko and was a direct fit http://www.iboats.com/Locking-Insert-fo ... gKcOvD_BwE

I've got mine under the v-berth cushions

Hi Mike When you do find the source please post it as I would like to change out both of mine too